omarchy-m-test report qVP5BAb44Yh8N7BUZoNHuMFj

$ omarchy-m-test

Apple MacBook Pro (14-inch, M2 Max, 2023)

tester run

chip: M2 Max (t6021, board j414c)
kernel: 7.1.12-2-11-ARCH
stack: converged 4.0.0
build: 84cfb93 · linux-aurora 7.1.12.aurora2-11 · omarchy-mac-boot 20261010-1 · built 2026-10-14T12:59:02Z · tester 0.1.13
image: format 1, platform apple-silicon, builder_commit 454311c6d3e1, builder_tree_clean true, image_profile release, package_set_sha256 79f8e36b977f, built 2026-10-14T12:59:02Z
system: omarchy, limine, encryption on
tool: omarchy-m-test 0.1.13
catalogue: feature catalogue v14
uploaded: 2026-10-15 04:12 UTC
results: 56 pass · 6 fail · 11 skip

packages (13)

omarchy-dev	4.0.0.r7017.g84cfb93-1
omarchy-settings-dev	4.0.0.r7017.g84cfb93-1
omarchy-mac	0.1.4-1
omarchy-mac-boot	20261010-1
linux-aurora	7.1.12.aurora2-11
m1n1-aurora	1.6.1.aurora1-3
uboot-asahi	2026.07.asahi2-4
limine	12.9.3-1
mesa	1:26.2.4-1
vulkan-asahi	1:26.2.4-1
asahi-audio	4.1-1
speakersafetyd	2.0.1-1
alsa-ucm-conf-asahi	10-1

system

PASS system.identity works Device tree, asahi layer

model: Apple MacBook Pro (14-inch, M2 Max, 2023)
compatible: apple,j414c apple,t6021 apple,arm-platform
chip: M2 Max (t6021)
kernel: 7.1.12-2-11-ARCH

PASS system.failed-units works System services, omarchy layer
```
PASS  units            no failed system or user units
```
SKIP system.snapshots not tested Snapshots, omarchy layer
```
SKIP  snapshots        needs passwordless sudo
```

boot

PASS boot.kernel-package works Boot chain, omarchy layer

PASS  kernel           running 7.1.12-2-11-ARCH from linux-aurora 7.1.12.aurora2-11

SKIP boot.chain not tested Boot chain, omarchy layer
```
SKIP  boot-check       needs passwordless sudo
```

SKIP boot.files not tested Boot chain, omarchy layer

SKIP  boot-file        hashing the boot files needs passwordless sudo

PASS boot.encryption works Disk encryption, omarchy layer

the root filesystem is on an unlocked encrypted volume: crypt btrfs < part crypto_LUKS < disk

packages

PASS packages.repositories works Package repositories, omarchy layer
```
PASS  repos            omarchy asahi-alarm core extra alarm aur
```
PASS packages.kernel-updates works Package repositories, omarchy layer
```
PASS  kernel-repo      linux-aurora updates from [omarchy]
```

PASS packages.hardware works First-boot hardware setup, omarchy layer

installed: mesa 1:26.2.4-1, vulkan-asahi 1:26.2.4-1, asahi-audio 4.1-1, speakersafetyd 2.0.1-1, alsa-ucm-conf-asahi 10-1

setup

PASS setup.first-boot-hardware works First-boot hardware setup, omarchy layer

omarchy-provision-hardware.service is disabled on this image by design: omarchy-mac-first-boot runs the deferred hardware setup (20-mac-first-boot.conf)
2026-10-14T23:30:41-04:00 <hostname> omarchy-mac-first-boot[6030]: Creating this Mac's package keyring...
2026-10-14T23:30:55-04:00 <hostname> omarchy-mac-first-boot[6030]: Ready for account setup.
2026-10-14T23:30:55-04:00 <hostname> systemd[1]: Finished Omarchy first boot: finish this Mac's image, then owner setup.
nothing left queued (/var/lib/omarchy/image/deferred-steps is gone)

PASS setup.vendor-firmware works Vendor firmware, omarchy layer

PASS  vendor-firmware  omarchy-vendor-firmware.service finished in this boot

hardware

PASS hardware.drivers works A driver for every hardware node, aurora layer

435 hardware nodes: 372 claimed by a driver, 35 with no device of their own, 5 that no driver binds by design (CPU frequency clusters, timer, SMBIOS), 23 disabled, 0 unclaimed

FAIL hardware.firmware doesn't work, but should on this Mac regression Firmware for every driver that asks, omarchy layer
```
dockchannel-hid 2a9b30000.input: Direct firmware load for apple/tpmtfw-j414c.bin failed with error -2
```

PASS hardware.probe-errors works A driver for every hardware node, aurora layer

3 deferred probe(s) pending early in this boot, bound to their drivers since (waiting for a module the initramfs didn't carry):
since bound: i2c 0-003f: deferred probe pending: (reason unknown)
since bound: i2c 0-0038: deferred probe pending: (reason unknown)
since bound: i2c 0-003b: deferred probe pending: (reason unknown)

PASS hardware.kernel-config works Kernel build options (compared with Asahi's), aurora layer

compared with Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07)
23 options differ: 5 built here but not by Asahi, 15 built by Asahi but not here, 3 set differently
CONFIG_APPLE_TUNABLE: Asahi m, this kernel y
CONFIG_BPF_LSM: Asahi y, this kernel n
CONFIG_BUILDTIME_MCOUNT_SORT: Asahi y, this kernel n
CONFIG_DYNAMIC_FTRACE: Asahi y, this kernel n
CONFIG_DYNAMIC_FTRACE_WITH_ARGS: Asahi y, this kernel n
CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS: Asahi y, this kernel n
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS: Asahi y, this kernel n
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY: Asahi y, this kernel n
CONFIG_FTRACE_SYSCALLS: Asahi y, this kernel n
CONFIG_FUNCTION_ALIGNMENT: Asahi 8, this kernel 4
CONFIG_FUNCTION_ALIGNMENT_8B: Asahi y, this kernel n
CONFIG_FUNCTION_GRAPH_TRACER: Asahi y, this kernel n
CONFIG_FUNCTION_TRACER: Asahi y, this kernel n
CONFIG_GENERIC_TRACER: Asahi y, this kernel n
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS: Asahi y, this kernel n
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS: Asahi y, this kernel n
CONFIG_RESET_APPLE_CIO: Asahi n, this kernel y
CONFIG_TASKS_RUDE_RCU: Asahi y, this kernel n
CONFIG_TRACE_SYSCALL_BUF_SIZE_DEFAULT: Asahi 63, this kernel n
CONFIG_TYPEC_SN201202X: Asahi n, this kernel m
CONFIG_USB4: Asahi n, this kernel m
CONFIG_USB4_APPLE_SOC: Asahi n, this kernel m
CONFIG_USB4_NET: Asahi n, this kernel m

gpu

PASS gpu.driver works GPU, asahi layer
```
asahi driver bound to 406400000.gpu
```

PASS gpu.vulkan works GPU, asahi layer

Asahi Vulkan driver installed (asahi_icd.json)
vulkaninfo (vulkan-tools) isn't installed, so the Vulkan version wasn't read

PASS gpu.opengl works GPU, asahi layer

renderer: Apple M2 Max (G14C B1)
OpenGL core profile version: 4.6 (Core Profile) Mesa 26.2.4-arch1.1
OpenGL ES profile version: OpenGL ES 3.2 Mesa 26.2.4-arch1.1
installed for this run, removed at its end: mesa-utils

video

FAIL video.h264-on-screen doesn't work, but should on this Mac Video decoder, asahi layer

already installed: mpv grim ffmpeg
hardware decode as mpv is configured: hwdec=auto-safe (/etc/mpv/mpv.conf)
screen: eDP-1 (built-in), H.264 test card full screen, paused
mode (from mpv's log): hardware decode vaapi (zero-copy), video output gpu-next, GPU context waylandvk
screenshot: 756x491, each bar's median colour in its middle, 64 levels allowed per channel
red bar: expected #ff0000, saw #006700 (wrong)
green bar: expected #00ff00, saw #ff95ff (wrong)
yellow bar: expected #ffff00, saw #ffa8ff (wrong)
blue bar: expected #0000ff, saw #005a00 (wrong)
magenta bar: expected #ff00ff, saw #006d00 (wrong)
cyan bar: expected #00ffff, saw #ff9bff (wrong)
on screen: 6 of 6 bars in the wrong colour (red, green, yellow, blue, magenta, cyan): green, blocky or garbled frames

FAIL video.hevc-on-screen doesn't work, but should on this Mac Video decoder, asahi layer

already installed: mpv grim ffmpeg
hardware decode as mpv is configured: hwdec=auto-safe (/etc/mpv/mpv.conf)
screen: eDP-1 (built-in), HEVC test card full screen, paused
mode (from mpv's log): hardware decode vaapi (zero-copy), video output gpu-next, GPU context waylandvk
screenshot: 756x491, each bar's median colour in its middle, 64 levels allowed per channel
red bar: expected #ff0000, saw #006700 (wrong)
green bar: expected #00ff00, saw #ff95ff (wrong)
yellow bar: expected #ffff00, saw #ffa8ff (wrong)
blue bar: expected #0000ff, saw #005a00 (wrong)
magenta bar: expected #ff00ff, saw #006d00 (wrong)
cyan bar: expected #00ffff, saw #ff9bff (wrong)
on screen: 6 of 6 bars in the wrong colour (red, green, yellow, blue, magenta, cyan): green, blocky or garbled frames

display

PASS display.outputs works Built-in display, asahi layer
```
PASS  displays         1 active: eDP-1 3024x1964@120
```
SKIP display.external-native-mode not tested Display coprocessor (DCP), asahi layer
```
skipped: no external display connected
```
PASS display.controller works Display coprocessor (DCP), asahi layer
```
ok - the display controller card exists
```
PASS display.backlight works Display brightness, asahi layer
```
ok - the panel backlight is apple-panel-bl
```
PASS display.notch-strip works Bar clear of the notch, omarchy layer
```
ok - appledrm is showing the notch strip
```

PASS display.notch-bar works Bar clear of the notch, omarchy layer

asked: Look at the top bar on the built-in screen: is every icon and label clear of the camera notch?
answer: yes

PASS display.brightness-steps works Display brightness, asahi layer

backlight apple-panel-bl: 140/500 at the start
stepped to 215 (read back 215), 290 (read back 290), 365 (read back 365)
put back to 140
asked: Did the built-in screen dim (or brighten) in three steps, then go back to how it was?
answer: yes

PASS display.cursor works (unconfirmed) Built-in display, asahi layer

asked: Move the pointer all over the built-in screen, over the top bar too: is it visible everywhere, without trails or flicker?
answer: yes, by pressing Enter (the default; unconfirmed)

audio

PASS audio.sound-cards works Audio interface (MCA), asahi layer
```
PASS  sound-cards      AppleJ414, AppleJ414HPAI
```

PASS audio.default-sink works Speakers, asahi layer

PASS  default-sink     MacBook Speakers (audio_effect.j414-convolver)

PASS audio.speaker-dsp works Speakers, asahi layer
```
PASS speaker DSP sink present
```
PASS audio.speaker-protection works Speaker protection, omarchy layer
```
PASS  speakersafetyd   speakersafetyd is active
```
PASS audio.speaker-amps-unlocked works Speaker protection, omarchy layer
```
PASS speaker amps unlocked this boot
```
PASS audio.microphone-mapping works Microphone mapping, omarchy layer
```
PASS mic mapper running
```

PASS audio.microphone-signal works Microphones, asahi layer

default input: omarchy_asahi_mic
captured 65536 samples: peak 106, rms 17.3 (16-bit)

PASS audio.speaker-tone works (unconfirmed) Speakers, asahi layer

speakersafetyd: active
kernel log: Speaker volumes unlocked
default output: audio_effect.j414-convolver (the speakers' DSP sink)
played a 2 s 440 Hz tone at 30% volume on audio_effect.j414-convolver
asked: Did you hear a short tone from the built-in speakers, without crackling or a pop?
answer: yes, by pressing Enter (the default; unconfirmed)

PASS audio.headphone-detection works (unconfirmed) 3.5 mm headphone jack, asahi layer

asked: Plug headphones into the headphone jack now (s if you have none). Did the Mac switch its sound to them?
answer: yes, by pressing Enter (the default; unconfirmed)
default output after: alsa_output.platform-sound.HiFi__Headphones__sink (the headphone jack)

network

PASS network.wifi works Wi-Fi, asahi layer

PASS  wifi             wlan0 is connected

PASS network.wifi-backend works iwd Wi-Fi backend, omarchy layer
```
PASS  wifi-backend     NetworkManager uses iwd
```
PASS network.bluetooth works Bluetooth, asahi layer
```
PASS  bluetooth        controller powered
```

PASS network.bluetooth-pairing works Bluetooth, asahi layer

Bluetooth controller powered (mac-check)
asked: Put a Bluetooth device (headphones, a mouse or a keyboard) in pairing mode and pair it: open Bluetooth (Super+Ctrl+B in Omarchy, or bluetui) and pick it (s if you have none to hand). Did it pair and work?
answer: yes
paired devices: 0 before, 1 after

PASS network.wifi-first-join works First join to a 5 GHz Wi-Fi network, omarchy layer

before: associated on 5 GHz (5745 MHz) with an address, on a NetworkManager connection that connects automatically
reloaded the Wi-Fi driver (brcmfmac); watched the rejoin for 45 s
first join: associated 2.45 s after the driver loaded
first join: an address (traffic) arrived 3.07 s after the driver loaded, 0.62 s after associating
band: 5 GHz (5745 MHz)
joins: 1

sleep

PASS sleep.lid-suspend works Suspend and sleep, asahi layer

before: eDP-1 on
lid closed: the Mac went to sleep 0.67 s later (s2idle)
woke up after 146.3 s asleep, when the lid opened

PASS sleep.clamshell works Clamshell mode (lid closed with an external display), omarchy layer

before: eDP-1 on, USB-2 on
logind: Docked=no, HandleLidSwitch=suspend, HandleLidSwitchDocked=ignore
lid closed for 10.2 s: the Mac stayed awake
while the lid was closed: eDP-1 off, USB-2 on
after the lid opened: eDP-1 on, USB-2 on

PASS sleep.wifi-after-resume works Wi-Fi, asahi layer

before sleeping: wlan0 connected with an IPv4 address
after waking up: an IPv4 address again 2.6 s after the Mac woke up

SKIP sleep.thunderbolt-after-resume not tested Thunderbolt, asahi layer

skipped: nothing was connected over Thunderbolt or USB4 before the Mac went to sleep

input

FAIL input.ambient-light doesn't work, but should on this Mac regression Always-on processor (AOP: ambient light sensor, lid angle), aurora layer
```
FAIL - ALS and keyboard LED are available
```
FAIL input.auto-keyboard-light doesn't work, but should on this Mac regression Automatic keyboard backlight, omarchy layer
```
FAIL - the ALS keyboard loop runs
```

FAIL input.keyboard-light-follows-room doesn't work, but should on this Mac regression Automatic keyboard backlight, omarchy layer

before: ambient light 86 lux, keyboard light 0/255
asked: Keep it covered: did the keyboard light come on, or get brighter, within about 10 seconds?
answer: no
while covered: ambient light 67 lux, keyboard light 0/255

PASS input.function-keys works (unconfirmed) Keyboard, asahi layer

built-in keyboard (Hyprland): apple-mtp-keyboard
hid_apple fnmode: 3 (auto: media keys first, F-keys with Fn)
asked: On the built-in keyboard, press the brightness keys (F1, F2) and the volume keys (F10, F11, F12), with Fn if they need it: did each do what its key shows?
answer: yes, by pressing Enter (the default; unconfirmed)

PASS input.trackpad-gestures works (unconfirmed) Trackpad, asahi layer

built-in trackpad (Hyprland): apple-mtp-multi-touch
Hyprland config: three-finger workspace swipe on
click: asked: On the built-in trackpad, press down to click: did it click?
click: answer: yes, by pressing Enter (the default; unconfirmed)
two-finger click: asked: Click with two fingers: did it right-click (a menu, where there is one)?
two-finger click: answer: yes, by pressing Enter (the default; unconfirmed)
two-finger scroll: asked: Scroll with two fingers, up and down: did it scroll smoothly both ways?
two-finger scroll: answer: yes, by pressing Enter (the default; unconfirmed)
three-finger swipe: asked: Swipe three fingers left and right: did it switch workspaces?
three-finger swipe: answer: yes, by pressing Enter (the default; unconfirmed)

sep

SKIP sep.attach not tested Secure enclave (SEP), asahi layer

passive SEP attachment state unavailable or unsupported
system firmware (sepOS proxy): unavailable
system iBoot build: mBoot-18000.161.10
stub firmware (not running sepOS): 13.5
stub iBoot build: iBoot-8422.141.2
m1n1 stage 2: v1.6.1-omarchy.aurora1
actual sepOS version/build: unavailable (not exposed by the kernel)
SEP diagnostics ABI: unavailable
SEP profile: unknown
SEP boot: unknown
SEP protocol: unknown
SEP attach: unknown
SEP endpoints: unknown
SEP keystore: unknown
SEP keybag: unknown
SEP sensor: unknown
SEP touchid: unknown
SEP xart: unknown
profile and protocol describe the driver, not the running sepOS version
SEP driver bound: unavailable
/dev/sep-bio present: no
xART writes parameter: unavailable
keybag provisioning parameter: unavailable
default sensor calibration file: unavailable
sensor device-tree node: absent
sensor node enabled: unavailable
linux-aurora: 7.1.12.aurora2-11
m1n1-aurora: 1.6.1.aurora1-3
apple-sep.service: inactive
aurora-sep.service: inactive
fprintd.service: inactive

touch-id

SKIP touch-id.ready not tested Touch ID, asahi layer

SEP platform device unavailable
SEP diagnostics ABI: unavailable
SEP profile: unknown
SEP boot: unknown
SEP protocol: unknown
SEP attach: unknown
SEP endpoints: unknown
SEP keystore: unknown
SEP keybag: unknown
SEP sensor: unknown
SEP touchid: unknown
SEP xart: unknown
profile and protocol describe the driver, not the running sepOS version
SEP driver bound: unavailable
/dev/sep-bio present: no
xART writes parameter: unavailable
keybag provisioning parameter: unavailable
default sensor calibration file: unavailable
sensor device-tree node: absent
sensor node enabled: unavailable
linux-aurora: 7.1.12.aurora2-11
m1n1-aurora: 1.6.1.aurora1-3
apple-sep.service: inactive
aurora-sep.service: inactive
fprintd.service: inactive

SKIP touch-id.unlock not tested Touch ID, asahi layer
```
skipped: SEP biometric device unavailable
```

camera

PASS camera.isp works Camera image signal processor (ISP), aurora layer

camera: /dev/video1, from the ISP driver (apple-isp)
other video devices: video0 (avd)

PASS camera.frames works Camera image signal processor (ISP), aurora layer

asked ffmpeg for 30 frames from /dev/video1 (read and discarded, none kept)
stream: 1920x1080, nv12
frames: 30 of 30

PASS camera.image works (unconfirmed) Camera image signal processor (ISP), aurora layer

showed /dev/video1 live for 10 s (mpv)
asked: Did the camera window show you, live: the right way up, in focus, with natural colours and smooth movement?
answer: yes, by pressing Enter (the default; unconfirmed)

ports

PASS ports.usb-c works USB3 on Thunderbolt ports, asahi layer

USB-C ports: 4 (USB-PD controller, /sys/class/typec), 1 with something plugged in
port 2: plugged in (data host, power source)
USB controllers: 2 root hubs (480 Mbps, 10000 Mbps)
USB devices: 1: storage at 480 Mbps

SKIP ports.thunderbolt not tested Thunderbolt, asahi layer

no Thunderbolt/USB4 domain registered (thunderbolt-apple-nhi)
skipped: the device you plugged in isn't Thunderbolt/USB4 (no USB-C partner in Thunderbolt alt mode or USB4 mode), so the Thunderbolt/USB4 host never starts

SKIP ports.external-displays not tested External displays over USB-C (DP alt mode and USB4), aurora layer
```
USB-C display connectors: 3 (USB-1, USB-2, USB-3)
skipped: no display plugged into a USB-C port
```

PASS ports.devices-work works (unconfirmed) USB3 on Thunderbolt ports, asahi layer

listed: 1 USB-C port(s) in use, 1 USB device(s), 0 Thunderbolt/USB4 link(s)
asked: Is everything you plugged into the USB-C ports listed above, and does it work (a stick's files open, a hub's or dock's ports work, a charger charges)?
answer: yes, by pressing Enter (the default; unconfirmed)

SKIP ports.external-display-picture not tested External displays over USB-C (DP alt mode and USB4), aurora layer
```
skipped: no display in use on a USB-C port
```

power

PASS power.battery works Battery information, asahi layer

macsmc-battery: Discharging, 23% charged, charge limit 100%

PASS power.charge-limit works Battery information, asahi layer

charge limit before: 100% (charging restarts at 100%)
set 80%: the SMC reads back 80% (charging restarts at 75%)
cleared to 100%: the SMC reads back 100% (charging restarts at 100%)
put back to 100% afterwards

PASS power.charge-limit-kept works Battery charge limit kept across reboots, omarchy layer

`omarchy-battery-charge-limit` shows 100%, as the SMC has
omarchy-mac's udev rule and helper that restore a saved limit at boot are installed
nothing saved in /etc/udev/macsmc-battery.conf
`omarchy battery charge limit 80`: the SMC reads back 80% (charging restarts at 75%), 80% saved for the next boot
`omarchy battery charge limit 100`: the SMC reads back 100% (charging restarts at 100%)
the saved limit put back as it was (no /etc/udev/macsmc-battery.conf)

PASS power.idle-draw works Battery information, asahi layer

idle on battery for 30 s: 16.0 W average (lowest 14.7 W, highest 17.5 W), from power_now
that's more than an idle Apple Silicon laptop usually draws (above 15 W): something may be keeping it busy

PASS power.sleep-drain works Suspend and sleep, asahi layer

asleep for 7.4 min (s2idle), on battery
battery: 12.28 Wh to 12.24 Wh
drain: 0.5% per hour asleep, 0.28 W on average (a full battery would last about 198 h asleep)

cpu

PASS cpu.frequency-scaling works CPU frequency scaling, asahi layer

policy0: CPUs 0-3, apple-cpufreq, 912-2424 MHz, schedutil
policy4: CPUs 4-7, apple-cpufreq, 702-3264 MHz, schedutil
policy8: CPUs 8-11, apple-cpufreq, 702-3264 MHz, schedutil

benchmark

PASS benchmark.opengl works GPU, asahi layer score 2,403 points (glmark2 2023.01, suite 1) · compare

installed for this run, removed at its end: glmark2 assimp vkmark
already installed: ffmpeg
glmark2-wayland --off-screen at 1920x1080, 8 scenes of 3 s (suite 1)
renderer: Apple M2 Max (G14C B1), OpenGL 4.6 (Compatibility Profile) Mesa 26.2.4-arch1.1
[build] use-vbo=true: 3499 fps (0.286 ms a frame)
[texture] texture-filter=linear: 3285 fps (0.304 ms a frame)
[shading] shading=phong: 3026 fps (0.330 ms a frame)
[bump] bump-render=high-poly: 2705 fps (0.370 ms a frame)
[effect2d] kernel=0,1,0;1,-4,1;0,1,0;: 2554 fps (0.392 ms a frame)
[desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: 987 fps (1.013 ms a frame)
[jellyfish] <default>: 2508 fps (0.399 ms a frame)
[terrain] <default>: 674 fps (1.485 ms a frame)
glmark2 score: 2403

PASS benchmark.vulkan works GPU, asahi layer score 5,522 points (vkmark 2025.01, suite 1) · compare

installed for this run, removed at its end: glmark2 assimp vkmark
already installed: ffmpeg
vkmark --winsys headless at 1920x1080, 7 scenes of 3 s (suite 1)
device: Apple M2 Max (G14C B1)
[vertex] device-local=true: 6174 fps (0.162 ms a frame)
[texture] anisotropy=16: 6585 fps (0.152 ms a frame)
[shading] shading=phong: 5082 fps (0.197 ms a frame)
[shading] shading=cel: 5127 fps (0.195 ms a frame)
[effect2d] kernel=blur: 4192 fps (0.239 ms a frame)
[desktop] <default>: 5442 fps (0.184 ms a frame)
[cube] <default>: 6053 fps (0.165 ms a frame)
vkmark score: 5522

PASS benchmark.h264-decode works Video decoder, asahi layer score 446 frames/s (ffmpeg n9.0.2, suite 1) · compare

installed for this run, removed at its end: glmark2 assimp vkmark
already installed: ffmpeg
clip: H.264 1920x1080, 150 frames (testsrc2, libx264 veryfast), decoded 4 times to a null output (suite 1)
software decode: 600 frames in 0.31 s, 1929.3 fps
hardware decode (VA-API): 600 frames in 1.34 s, 446.1 fps
hardware decode is 0.23x software decode
ffmpeg n9.0.2

PASS benchmark.hevc-decode works Video decoder, asahi layer score 762 frames/s (ffmpeg n9.0.2, suite 1) · compare

installed for this run, removed at its end: glmark2 assimp vkmark
already installed: ffmpeg
clip: HEVC 1920x1080, 150 frames (testsrc2, libx265 ultrafast), decoded 4 times to a null output (suite 1)
software decode: 600 frames in 0.38 s, 1600.0 fps
hardware decode (VA-API): 600 frames in 0.79 s, 762.4 fps
hardware decode is 0.48x software decode
ffmpeg n9.0.2

hardware inventory

435 hardware nodes: 372 claimed by a driver, 35 with no device of their own, 5 bus or register containers with no driver of their own, 23 disabled, 0 unclaimed.

Unknown hardware

None: every node on this Mac is either claimed by a driver or known to the feature catalogue.

Kernel build options

23 options differ from Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07).

option	Asahi	this kernel
`CONFIG_APPLE_TUNABLE`	m	y
`CONFIG_BPF_LSM`	y	n
`CONFIG_BUILDTIME_MCOUNT_SORT`	y	n
`CONFIG_DYNAMIC_FTRACE`	y	n
`CONFIG_DYNAMIC_FTRACE_WITH_ARGS`	y	n
`CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS`	y	n
`CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS`	y	n
`CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY`	y	n
`CONFIG_FTRACE_SYSCALLS`	y	n
`CONFIG_FUNCTION_ALIGNMENT`	8	4
`CONFIG_FUNCTION_ALIGNMENT_8B`	y	n
`CONFIG_FUNCTION_GRAPH_TRACER`	y	n
`CONFIG_FUNCTION_TRACER`	y	n
`CONFIG_GENERIC_TRACER`	y	n
`CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS`	y	n
`CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS`	y	n
`CONFIG_RESET_APPLE_CIO`	n	y
`CONFIG_TASKS_RUDE_RCU`	y	n
`CONFIG_TRACE_SYSCALL_BUF_SIZE_DEFAULT`	63	n
`CONFIG_TYPEC_SN201202X`	n	m
`CONFIG_USB4`	n	m
`CONFIG_USB4_APPLE_SOC`	n	m
`CONFIG_USB4_NET`	n	m