$ omarchy-m-test
Apple MacBook Pro (13-inch, M2, 2022)
community report
- chip
- M2 (t8112, board j493)
- kernel
- 7.1.12-2-20261017.20-sep-ARCH
- stack
- converged 4.0.3
- build
- 4.0.3rc4-1 · linux-aurora 7.1.12.aurora2-20261017.20 · tester 0.1.13
- system
- archarm, grub, encryption off
- tool
- omarchy-m-test 0.1.13
- catalogue
- feature catalogue v14
- uploaded
- 2026-10-19 10:26 UTC
- results
- 48 pass · 7 fail · 1 gap · 17 skip
packages (11)
| omarchy | 4.0.3rc4-1 |
| omarchy-settings | 4.0.3rc4-1 |
| omarchy-mac-keyring | 20260914-2 |
| linux-aurora | 7.1.12.aurora2-20261017.20 |
| m1n1-aurora | 1.6.1.aurora17-5 |
| uboot-asahi | 2026.07.asahi2-1 |
| mesa | 1:26.2.5-1 |
| vulkan-asahi | 1:26.2.5-1 |
| asahi-audio | 4.1-1 |
| speakersafetyd | 2.0.1-1 |
| alsa-ucm-conf-asahi | 10-1 |
system
-
PASS
system.identity
works
Device tree, asahi layer
model: Apple MacBook Pro (13-inch, M2, 2022) compatible: apple,j493 apple,t8112 apple,arm-platform chip: M2 (t8112) kernel: 7.1.12-2-20261017.20-sep-ARCH
-
PASS
system.failed-units
works
System services, omarchy layer
PASS units no failed system or user units
-
SKIP
system.snapshots
not tested
Snapshots, omarchy layer
SKIP snapshots needs passwordless sudo
boot
-
PASS
boot.kernel-package
works
Boot chain, omarchy layer
PASS kernel running 7.1.12-2-20261017.20-sep-ARCH from linux-aurora 7.1.12.aurora2-20261017.20
-
FAIL
boot.chain
doesn't work, but should on this Mac
Boot chain, omarchy layer
FAIL boot-check omarchy-apple-silicon-boot-check is not installed
-
SKIP
boot.files
not tested
Boot chain, omarchy layer
SKIP boot-file hashing the boot files needs passwordless sudo
-
SKIP
boot.encryption
not tested
Disk encryption, omarchy layer
the root filesystem isn't encrypted: part btrfs < disk
packages
-
PASS
packages.repositories
works
Package repositories, omarchy layer
PASS repos omarchy-aarch64 asahi-alarm core extra alarm aur omarchy
-
PASS
packages.kernel-updates
works
Package repositories, omarchy layer
PASS kernel-repo linux-aurora updates from [omarchy]
-
PASS
packages.hardware
works
First-boot hardware setup, omarchy layer
installed: mesa 1:26.2.5-1, vulkan-asahi 1:26.2.5-1, asahi-audio 4.1-1, speakersafetyd 2.0.1-1, alsa-ucm-conf-asahi 10-1
setup
-
SKIP
setup.first-boot-hardware
not tested
First-boot hardware setup, omarchy layer
omarchy-provision-hardware.service never ran: this install has no deferred first-boot hardware setup
-
FAIL
setup.vendor-firmware
doesn't work, but should on this Mac
Vendor firmware, omarchy layer
FAIL vendor-firmware omarchy-vendor-firmware.service is not installed
hardware
-
GAP
hardware.drivers
not yet supported by Aurora
A driver for every hardware node, aurora layer
303 hardware nodes: 253 claimed by a driver, 22 with no device of their own, 4 that no driver binds by design (CPU frequency clusters, timer, SMBIOS), 23 disabled, 1 unclaimed unclaimed: apple,mesa-fingerprint (1 node): unknown hardware
-
PASS
hardware.firmware
works
Firmware for every driver that asks, omarchy layer
no firmware-load failures in this boot's kernel log
-
PASS
hardware.probe-errors
works
A driver for every hardware node, aurora layer
no driver probe errors in this boot's kernel log
-
PASS
hardware.kernel-config
works
Kernel build options (compared with Asahi's), aurora layer
compared with Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07) 66 options differ: 45 built here but not by Asahi, 16 built by Asahi but not here, 5 set differently CONFIG_APPLE_CLPC: Asahi n, this kernel m CONFIG_APPLE_J613_DISPLAY_GATE: Asahi n, this kernel y CONFIG_APPLE_MCC: Asahi n, this kernel y CONFIG_APPLE_PMC: Asahi n, this kernel y CONFIG_APPLE_SEP: Asahi y, this kernel m CONFIG_APPLE_SEP_FV_INTERFACE: Asahi n, this kernel y CONFIG_APPLE_T6030_DISPLAY_GATE: Asahi n, this kernel y CONFIG_APPLE_TUNABLE: Asahi m, this kernel y CONFIG_ARCH_HAS_MM_PGTABLE: Asahi n, this kernel y CONFIG_ARCH_HAS_USER_PAGE_SIZE: Asahi n, this kernel y CONFIG_ARCH_SUPPORTS_PT_RECLAIM: Asahi n, this kernel y CONFIG_ARM64_BTI_KERNEL: Asahi n, this kernel y CONFIG_ARM64_USER4K_EXPERIMENTAL: Asahi n, this kernel y CONFIG_BLK_INLINE_ENCRYPTION: Asahi n, this kernel y CONFIG_BPF_LSM: Asahi y, this kernel n CONFIG_BT_MTK7932_PCIE: Asahi n, this kernel m CONFIG_BUILDTIME_MCOUNT_SORT: Asahi y, this kernel n CONFIG_DRM_ACCEL_ANE: Asahi n, this kernel m CONFIG_DRM_APPLE_FABRIC_CORE: Asahi n, this kernel m CONFIG_DYNAMIC_FTRACE: Asahi y, this kernel n CONFIG_DYNAMIC_FTRACE_WITH_ARGS: Asahi y, this kernel n CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS: Asahi y, this kernel n CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS: Asahi y, this kernel n CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY: Asahi y, this kernel n CONFIG_FTRACE_SYSCALLS: Asahi y, this kernel n CONFIG_FUNCTION_ALIGNMENT: Asahi 8, this kernel 4 CONFIG_FUNCTION_ALIGNMENT_8B: Asahi y, this kernel n CONFIG_FUNCTION_GRAPH_TRACER: Asahi y, this kernel n CONFIG_FUNCTION_TRACER: Asahi y, this kernel n CONFIG_GENERIC_TRACER: Asahi y, this kernel n CONFIG_HAS_LTO_CLANG: Asahi n, this kernel y CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE: Asahi n, this kernel y CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS: Asahi n, this kernel y CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC: Asahi n, this kernel y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS: Asahi y, this kernel n CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS: Asahi y, this kernel n CONFIG_HID_APPLE_MTP_HAPTIC: Asahi n, this kernel m CONFIG_IGB: Asahi n, this kernel m CONFIG_IGB_HWMON: Asahi n, this kernel y CONFIG_IGC: Asahi n, this kernel m [26 more differences]
gpu
-
PASS
gpu.driver
works
GPU, asahi layer
asahi driver bound to 206400000.gpu
-
PASS
gpu.vulkan
works
GPU, asahi layer
Asahi Vulkan driver installed (asahi_icd.json) vulkaninfo (vulkan-tools) isn't installed, so the Vulkan version wasn't read
-
PASS
gpu.opengl
works
GPU, asahi layer
renderer: Apple M2 (G14G B0) OpenGL core profile version: 4.6 (Core Profile) Mesa 26.2.5-arch1.1 OpenGL ES profile version: OpenGL ES 3.2 Mesa 26.2.5-arch1.1
video
-
FAIL
video.h264-on-screen
doesn't work, but should on this Mac
Video decoder, asahi layer
already installed: mpv grim ffmpeg hardware decode asked for with --hwdec=auto-safe (mpv's configuration leaves hardware decode off) screen: eDP-1 (built-in), H.264 test card full screen, paused mode (from mpv's log): hardware decode vaapi (zero-copy), video output gpu-next, GPU context waylandvk screenshot: 1024x640, each bar's median colour in its middle, 64 levels allowed per channel red bar: expected #ff0000, saw #006700 (wrong) green bar: expected #00ff00, saw #ff95ff (wrong) yellow bar: expected #ffff00, saw #ffa8ff (wrong) blue bar: expected #0000ff, saw #005a00 (wrong) magenta bar: expected #ff00ff, saw #006d00 (wrong) cyan bar: expected #00ffff, saw #ff9bff (wrong) on screen: 6 of 6 bars in the wrong colour (red, green, yellow, blue, magenta, cyan): green, blocky or garbled frames
-
FAIL
video.hevc-on-screen
doesn't work, but should on this Mac
Video decoder, asahi layer
already installed: mpv grim ffmpeg hardware decode asked for with --hwdec=auto-safe (mpv's configuration leaves hardware decode off) screen: eDP-1 (built-in), HEVC test card full screen, paused mode (from mpv's log): hardware decode vaapi (zero-copy), video output gpu-next, GPU context waylandvk screenshot: 1024x640, each bar's median colour in its middle, 64 levels allowed per channel red bar: expected #ff0000, saw #006700 (wrong) green bar: expected #00ff00, saw #ff95ff (wrong) yellow bar: expected #ffff00, saw #ffa8ff (wrong) blue bar: expected #0000ff, saw #005a00 (wrong) magenta bar: expected #ff00ff, saw #006d00 (wrong) cyan bar: expected #00ffff, saw #ff9bff (wrong) on screen: 6 of 6 bars in the wrong colour (red, green, yellow, blue, magenta, cyan): green, blocky or garbled frames
display
-
PASS
display.outputs
works
Built-in display, asahi layer
PASS displays 1 active: eDP-1 2560x1600@60
-
SKIP
display.external-native-mode
not tested
Display coprocessor (DCP), asahi layer
skipped: no external display connected
-
PASS
display.controller
works
Display coprocessor (DCP), asahi layer
ok - the display controller card exists
-
PASS
display.backlight
works
Display brightness, asahi layer
ok - the panel backlight is apple-panel-bl
-
PASS
display.notch-strip
works
Bar clear of the notch, omarchy layer
ok - appledrm is showing the notch strip
-
SKIP
display.notch-bar
not tested
Bar clear of the notch, omarchy layer
skipped: this Mac has no notch
-
FAIL
display.brightness-steps
doesn't work, but should on this Mac
Display brightness, asahi layer
backlight apple-panel-bl: 140/509 at the start stepped to 216 (read back 216), 292 (read back 292), 369 (read back 369) put back to 140 asked: Did the built-in screen dim (or brighten) in three steps, then go back to how it was? answer: no
-
PASS
display.cursor
works (unconfirmed)
Built-in display, asahi layer
asked: Move the pointer all over the built-in screen, over the top bar too: is it visible everywhere, without trails or flicker? answer: yes, by pressing Enter (the default; unconfirmed)
audio
-
PASS
audio.sound-cards
works
Audio interface (MCA), asahi layer
PASS sound-cards AppleJ493HPAI, AppleJ493
-
PASS
audio.default-sink
works
Speakers, asahi layer
PASS default-sink MacBook Pro J493 Speakers (audio_effect.j493-convolver)
-
PASS
audio.speaker-dsp
works
Speakers, asahi layer
PASS speaker DSP sink present
-
PASS
audio.speaker-protection
works
Speaker protection, omarchy layer
PASS speakersafetyd speakersafetyd is active
-
PASS
audio.speaker-amps-unlocked
works
Speaker protection, omarchy layer
PASS speaker amps unlocked this boot
-
PASS
audio.microphone-mapping
works
Microphone mapping, omarchy layer
PASS mic mapper running
-
PASS
audio.microphone-signal
works
Microphones, asahi layer
default input: omarchy_asahi_mic.monitor captured 65536 samples: peak 3729, rms 235.7 (16-bit)
-
PASS
audio.speaker-tone
works (unconfirmed)
Speakers, asahi layer
speakersafetyd: active kernel log: Speaker volumes unlocked default output: audio_effect.j493-convolver (the speakers' DSP sink) played a 2 s 440 Hz tone at 30% volume on audio_effect.j493-convolver asked: Did you hear a short tone from the built-in speakers, without crackling or a pop? answer: yes, by pressing Enter (the default; unconfirmed)
-
PASS
audio.headphone-detection
works (unconfirmed)
3.5 mm headphone jack, asahi layer
asked: Plug headphones into the headphone jack now (s if you have none). Did the Mac switch its sound to them? answer: yes, by pressing Enter (the default; unconfirmed) default output after: alsa_output.platform-sound.HiFi__Headphones__sink (the headphone jack)
network
-
PASS
network.wifi
works
Wi-Fi, asahi layer
PASS wifi wlan0 is connected
-
FAIL
network.wifi-backend
doesn't work, but should on this Mac
iwd Wi-Fi backend, omarchy layer
FAIL wifi-backend NetworkManager is not configured with wifi.backend=iwd
-
PASS
network.bluetooth
works
Bluetooth, asahi layer
PASS bluetooth controller powered
-
SKIP
network.bluetooth-pairing
not tested
Bluetooth, asahi layer
Bluetooth controller powered (mac-check) asked: Put a Bluetooth device (headphones, a mouse or a keyboard) in pairing mode and pair it: open Bluetooth (Super+Ctrl+B in Omarchy, or bluetui) and pick it (s if you have none to hand). Did it pair and work? answer: skip paired devices: 0 before, 0 after
-
PASS
network.wifi-first-join
works
First join to a 5 GHz Wi-Fi network, omarchy layer
before: associated on 5 GHz (5260 MHz) with an address, on a NetworkManager connection that connects automatically reloaded the Wi-Fi driver (brcmfmac); watched the rejoin for 45 s first join: associated 6.94 s after the driver loaded first join: an address (traffic) arrived 7.15 s after the driver loaded, 0.21 s after associating band: 5 GHz (5260 MHz) joins: 1
sleep
-
PASS
sleep.lid-suspend
works
Suspend and sleep, asahi layer
before: eDP-1 on lid closed: the Mac went to sleep 1.16 s later (s2idle) woke up after 9.6 s asleep, when the lid opened
-
SKIP
sleep.clamshell
not tested
Clamshell mode (lid closed with an external display), omarchy layer
displays: eDP-1 on skipped: Hyprland shows no external display on
-
PASS
sleep.wifi-after-resume
works
Wi-Fi, asahi layer
before sleeping: wlan0 connected with an IPv4 address after waking up: an IPv4 address again 3.6 s after the Mac woke up
-
SKIP
sleep.thunderbolt-after-resume
not tested
Thunderbolt, asahi layer
skipped: nothing was connected over Thunderbolt or USB4 before the Mac went to sleep
input
-
PASS
input.ambient-light
works
Always-on processor (AOP: ambient light sensor, lid angle), aurora layer
ok - ALS and keyboard LED are available
-
PASS
input.auto-keyboard-light
works
Automatic keyboard backlight, omarchy layer
ok - the ALS keyboard loop runs
-
SKIP
input.keyboard-light-follows-room
not tested
Automatic keyboard backlight, omarchy layer
before: ambient light 35 lux, keyboard light 221/255 asked: Keep it covered: did the keyboard light come on, or get brighter, within about 10 seconds? answer: skip while covered: ambient light 34 lux, keyboard light 255/255
-
PASS
input.function-keys
works (unconfirmed)
Keyboard, asahi layer
built-in keyboard (Hyprland): apple-mtp-keyboard hid_apple fnmode: 1 (media keys first, F-keys with Fn) asked: On the built-in keyboard, press the brightness keys (F1, F2) and the volume keys (F10, F11, F12), with Fn if they need it: did each do what its key shows? answer: yes, by pressing Enter (the default; unconfirmed)
-
PASS
input.trackpad-gestures
works (unconfirmed)
Trackpad, asahi layer
built-in trackpad (Hyprland): apple-mtp-multi-touch Hyprland config: three-finger workspace swipe off click: asked: On the built-in trackpad, press down to click: did it click? click: answer: yes, by pressing Enter (the default; unconfirmed) two-finger click: asked: Click with two fingers: did it right-click (a menu, where there is one)? two-finger click: answer: yes, by pressing Enter (the default; unconfirmed) two-finger scroll: asked: Scroll with two fingers, up and down: did it scroll smoothly both ways? two-finger scroll: answer: yes, by pressing Enter (the default; unconfirmed) three-finger swipe: skipped: off in your config
sep
-
PASS
sep.attach
works
Secure enclave (SEP), asahi layer
SEP attached and advertised endpoints; fingerprint matching is checked separately system firmware (sepOS proxy): 27.0 system iBoot build: mBoot-20457.1.29 stub firmware (not running sepOS): 13.5 stub iBoot build: iBoot-8422.141.2 m1n1 stage 2: v1.6.1-omarchy.aurora17 actual sepOS version/build: unavailable (not exposed by the kernel) SEP diagnostics ABI: 1 SEP profile: T8112/J415 SEP boot: warm SEP protocol: variant5 SEP attach: attached SEP endpoints: 12 SEP keystore: open SEP keybag: unknown SEP sensor: unbound SEP touchid: unknown SEP xart: disabled profile and protocol describe the driver, not the running sepOS version SEP driver bound: yes /dev/sep-bio present: yes xART writes parameter: unavailable keybag provisioning parameter: unavailable default sensor calibration file: unavailable sensor device-tree node: present sensor node enabled: yes linux-aurora: 7.1.12.aurora2-20261017.20 m1n1-aurora: 1.6.1.aurora17-5 libfprint: 1.94.100-1.1 aurora-touchid: 20261003-2 fprintd: 1.94.5-2 apple-sep.service: active aurora-sep.service: inactive fprintd.service: inactive SEP: other driver event SEP: platform profile selected SEP: anti-replay store event SEP: endpoints advertised
touch-id
-
SKIP
touch-id.ready
not tested
Touch ID, asahi layer
read-only SEP installation: fingerprint operations are disabled SEP diagnostics ABI: 1 SEP profile: T8112/J415 SEP boot: warm SEP protocol: variant5 SEP attach: attached SEP endpoints: 12 SEP keystore: open SEP keybag: unknown SEP sensor: unbound SEP touchid: unknown SEP xart: disabled profile and protocol describe the driver, not the running sepOS version SEP driver bound: yes /dev/sep-bio present: yes xART writes parameter: unavailable keybag provisioning parameter: unavailable default sensor calibration file: unavailable sensor device-tree node: present sensor node enabled: yes linux-aurora: 7.1.12.aurora2-20261017.20 m1n1-aurora: 1.6.1.aurora17-5 libfprint: 1.94.100-1.1 aurora-touchid: 20261003-2 fprintd: 1.94.5-2 apple-sep.service: active aurora-sep.service: inactive fprintd.service: inactive SEP: other driver event SEP: platform profile selected SEP: anti-replay store event SEP: endpoints advertised
-
SKIP
touch-id.unlock
not tested
Touch ID, asahi layer
observational check of an existing unlock this boot; no verification command was run an enrollment listing or a readiness flag alone is not proof of matching asked: With a fingerprint you already enrolled, did your normal Touch ID unlock (lock screen or sudo) work this boot? Skip if you haven't tried it or have no enrollment. answer: skip
camera
-
PASS
camera.isp
works
Camera image signal processor (ISP), aurora layer
camera: /dev/video1, from the ISP driver (apple-isp) other video devices: video0 (avd)
-
PASS
camera.frames
works
Camera image signal processor (ISP), aurora layer
asked ffmpeg for 30 frames from /dev/video1 (read and discarded, none kept) stream: 1280x720, nv12 frames: 30 of 30
-
PASS
camera.image
works (unconfirmed)
Camera image signal processor (ISP), aurora layer
showed /dev/video1 live for 10 s (mpv) asked: Did the camera window show you, live: the right way up, in focus, with natural colours and smooth movement? answer: yes, by pressing Enter (the default; unconfirmed)
ports
-
SKIP
ports.usb-c
not tested
USB3 on Thunderbolt ports, asahi layer
USB-C ports: 2 (USB-PD controller, /sys/class/typec), 1 with something plugged in port 1: plugged in (data device, power sink) no USB controller (no root hub in /sys/bus/usb) USB devices: none skipped: no USB device attached (the USB controller only comes up while something is plugged into a USB-C port); plugging one in was skipped
-
SKIP
ports.thunderbolt
not tested
Thunderbolt, asahi layer
no Thunderbolt/USB4 domain registered (thunderbolt-apple-nhi) skipped: the device you plugged in isn't Thunderbolt/USB4 (no USB-C partner in Thunderbolt alt mode or USB4 mode), so the Thunderbolt/USB4 host never starts
-
SKIP
ports.external-displays
not tested
External displays over USB-C (DP alt mode and USB4), aurora layer
USB-C display connectors: 2 (DP-1, DP-2) skipped: no display plugged into a USB-C port
-
SKIP
ports.devices-work
not tested
USB3 on Thunderbolt ports, asahi layer
listed: 1 USB-C port(s) in use, 0 USB device(s), 0 Thunderbolt/USB4 link(s) asked: Is everything you plugged into the USB-C ports listed above, and does it work (a stick's files open, a hub's or dock's ports work, a charger charges)? answer: skip
-
SKIP
ports.external-display-picture
not tested
External displays over USB-C (DP alt mode and USB4), aurora layer
skipped: no display in use on a USB-C port
power
-
PASS
power.battery
works
Battery information, asahi layer
macsmc-battery: Charging, 97% charged, charge limit 100%
-
PASS
power.charge-limit
works
Battery information, asahi layer
charge limit before: 100% (charging restarts at 100%) set 80%: the SMC reads back 80% (charging restarts at 75%) cleared to 100%: the SMC reads back 100% (charging restarts at 100%) put back to 100% afterwards
-
FAIL
power.charge-limit-kept
doesn't work, but should on this Mac
Battery charge limit kept across reboots, omarchy layer
`omarchy-battery-charge-limit` shows 100%, as the SMC has nothing saved in /etc/udev/macsmc-battery.conf nothing of omarchy-mac's restores a saved limit at boot (/usr/lib/udev/rules.d/94-omarchy-mac-battery-charge-limit.rules, /usr/lib/omarchy-mac/battery-charge-limit-restore missing) the saved limit put back as it was (no /etc/udev/macsmc-battery.conf)
-
PASS
power.idle-draw
works
Battery information, asahi layer
idle on battery for 30 s: 4.9 W average (lowest 4.9 W, highest 5.0 W), from power_now
-
PASS
power.sleep-drain
works
Suspend and sleep, asahi layer
asleep for 33.5 min (s2idle), on battery battery: 47.40 Wh to 47.09 Wh drain: 1.1% per hour asleep, 0.55 W on average (a full battery would last about 89 h asleep)
cpu
-
PASS
cpu.frequency-scaling
works
CPU frequency scaling, asahi layer
policy0: CPUs 0-3, apple-cpufreq, 600-2424 MHz, schedutil policy4: CPUs 4-7, apple-cpufreq, 660-3204 MHz, schedutil
benchmark
-
PASS
benchmark.opengl
works
GPU, asahi layer
score 1,561 points (glmark2 2023.01, suite 1) · compare
installed for this run, removed at its end: glmark2 assimp vkmark already installed: ffmpeg glmark2-wayland --off-screen at 1920x1080, 8 scenes of 3 s (suite 1) renderer: Apple M2 (G14G B0), OpenGL 4.6 (Compatibility Profile) Mesa 26.2.5-arch1.1 [build] use-vbo=true: 2277 fps (0.439 ms a frame) [texture] texture-filter=linear: 2334 fps (0.429 ms a frame) [shading] shading=phong: 1983 fps (0.504 ms a frame) [bump] bump-render=high-poly: 1522 fps (0.657 ms a frame) [effect2d] kernel=0,1,0;1,-4,1;0,1,0;: 1604 fps (0.624 ms a frame) [desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: 886 fps (1.129 ms a frame) [jellyfish] <default>: 1544 fps (0.648 ms a frame) [terrain] <default>: 350 fps (2.864 ms a frame) glmark2 score: 1561
-
PASS
benchmark.vulkan
works
GPU, asahi layer
score 3,316 points (vkmark 2025.01, suite 1) · compare
installed for this run, removed at its end: glmark2 assimp vkmark already installed: ffmpeg vkmark --winsys headless at 1920x1080, 7 scenes of 3 s (suite 1) device: Apple M2 (G14G B0) [vertex] device-local=true: 3526 fps (0.284 ms a frame) [texture] anisotropy=16: 3829 fps (0.261 ms a frame) [shading] shading=phong: 2892 fps (0.346 ms a frame) [shading] shading=cel: 2819 fps (0.355 ms a frame) [effect2d] kernel=blur: 2308 fps (0.433 ms a frame) [desktop] <default>: 3892 fps (0.257 ms a frame) [cube] <default>: 3952 fps (0.253 ms a frame) vkmark score: 3316
-
PASS
benchmark.h264-decode
works
Video decoder, asahi layer
score 527 frames/s (ffmpeg n9.0.2, suite 1) · compare
installed for this run, removed at its end: glmark2 assimp vkmark already installed: ffmpeg clip: H.264 1920x1080, 150 frames (testsrc2, libx264 veryfast), decoded 4 times to a null output (suite 1) software decode: 600 frames in 0.42 s, 1415.1 fps hardware decode (VA-API): 600 frames in 1.14 s, 527.2 fps hardware decode is 0.37x software decode ffmpeg n9.0.2
-
PASS
benchmark.hevc-decode
works
Video decoder, asahi layer
score 1,087 frames/s (ffmpeg n9.0.2, suite 1) · compare
installed for this run, removed at its end: glmark2 assimp vkmark already installed: ffmpeg clip: HEVC 1920x1080, 150 frames (testsrc2, libx265 ultrafast), decoded 4 times to a null output (suite 1) software decode: 600 frames in 0.49 s, 1212.1 fps hardware decode (VA-API): 600 frames in 0.55 s, 1087.0 fps hardware decode is 0.90x software decode ffmpeg n9.0.2
hardware inventory
303 hardware nodes: 253 claimed by a driver, 22 with no device of their own, 4 bus or register containers with no driver of their own, 23 disabled, 1 unclaimed.
Unknown hardware
apple,mesa-fingerprint(1 node): unknown hardware, no driver claimed it
Kernel build options
66 options differ from Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07).
| option | Asahi | this kernel |
|---|---|---|
CONFIG_APPLE_CLPC | n | m |
CONFIG_APPLE_J613_DISPLAY_GATE | n | y |
CONFIG_APPLE_MCC | n | y |
CONFIG_APPLE_PMC | n | y |
CONFIG_APPLE_SEP | y | m |
CONFIG_APPLE_SEP_FV_INTERFACE | n | y |
CONFIG_APPLE_T6030_DISPLAY_GATE | n | y |
CONFIG_APPLE_TUNABLE | m | y |
CONFIG_ARCH_HAS_MM_PGTABLE | n | y |
CONFIG_ARCH_HAS_USER_PAGE_SIZE | n | y |
CONFIG_ARCH_SUPPORTS_PT_RECLAIM | n | y |
CONFIG_ARM64_BTI_KERNEL | n | y |
CONFIG_ARM64_USER4K_EXPERIMENTAL | n | y |
CONFIG_BLK_INLINE_ENCRYPTION | n | y |
CONFIG_BPF_LSM | y | n |
CONFIG_BT_MTK7932_PCIE | n | m |
CONFIG_BUILDTIME_MCOUNT_SORT | y | n |
CONFIG_DRM_ACCEL_ANE | n | m |
CONFIG_DRM_APPLE_FABRIC_CORE | n | m |
CONFIG_DYNAMIC_FTRACE | y | n |
CONFIG_DYNAMIC_FTRACE_WITH_ARGS | y | n |
CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS | y | n |
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS | y | n |
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY | y | n |
CONFIG_FTRACE_SYSCALLS | y | n |
CONFIG_FUNCTION_ALIGNMENT | 8 | 4 |
CONFIG_FUNCTION_ALIGNMENT_8B | y | n |
CONFIG_FUNCTION_GRAPH_TRACER | y | n |
CONFIG_FUNCTION_TRACER | y | n |
CONFIG_GENERIC_TRACER | y | n |
CONFIG_HAS_LTO_CLANG | n | y |
CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE | n | y |
CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS | n | y |
CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC | n | y |
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS | y | n |
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS | y | n |
CONFIG_HID_APPLE_MTP_HAPTIC | n | m |
CONFIG_IGB | n | m |
CONFIG_IGB_HWMON | n | y |
CONFIG_IGC | n | m |
CONFIG_IGC_LEDS | n | y |
CONFIG_MM_ID | n | y |
CONFIG_MM_SUBPAGE | n | y |
CONFIG_MT7932_FULLMAC | n | m |
CONFIG_MTD_PHRAM | n | m |
CONFIG_NET_VENDOR_I825XX | n | y |
CONFIG_NET_VENDOR_INTEL | n | y |
CONFIG_PAGE_EXTENSION | n | y |
CONFIG_PCIE_APPLE_PIODMA_DIAG | n | y |
CONFIG_RESET_APPLE_CIO | n | y |
CONFIG_SENSORS_APPLE_PMP_J613 | n | m |
CONFIG_SERIAL_APPLE_DOCKCHANNEL | n | y |
CONFIG_SERIAL_APPLE_DOCKCHANNEL_EARLYCON | n | y |
CONFIG_SND_SOC_APPLE_T8140_AOP_AUDIO | n | m |
CONFIG_SPI_APPLE_QSPI | n | m |
CONFIG_TASKS_RUDE_RCU | y | n |
CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR | n | y |
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE | y | n |
CONFIG_TRACE_SYSCALL_BUF_SIZE_DEFAULT | 63 | n |
CONFIG_TRUSTED_KEYS | n | y |
CONFIG_TYPEC | m | y |
CONFIG_TYPEC_SN201202X | n | m |
CONFIG_USB4 | n | m |
CONFIG_USB4_APPLE_SOC | n | m |
CONFIG_USB4_NET | n | m |
CONFIG_WARN_CONTEXT_ANALYSIS | n | y |