omarchy-m-testing Install
omarchy-m-test report NPZGuoSYduZNyMxjHRGRWsWC

$ omarchy-m-test

Apple MacBook Pro (16-inch, M1 Max, 2021)

community report

chip
M1 Max (t6001, board j316c)
kernel
7.1.12-2-12.6-sep-ARCH
stack
mx-mac 4.0.4
build
ca187b0 · linux-aurora 7.1.12.aurora2-20261013.18 · omarchy-mac-boot 20261005-1 · tester 0.1.13
system
omarchy, limine, encryption off
tool
omarchy-m-test 0.1.13
catalogue
feature catalogue v14
uploaded
2026-10-21 23:10 UTC
results
31 pass · 4 fail · 1 gap · 37 skip
packages (11)
omarchy-dev4.0.4.r7081.gca187b0-1
omarchy-settings-dev4.0.4.r7081.gca187b0-1
omarchy-mac-boot20261005-1
linux-aurora7.1.12.aurora2-20261013.18
m1n1-aurora1.6.1.aurora14-1
uboot-asahi2026.07.asahi2-3
limine12.8.0-1
mesa1:26.2.4-1
asahi-audio4.1-1
speakersafetyd2.0.1-1
alsa-ucm-conf-asahi10-1

system

  • PASS system.identity works Device tree, asahi layer 
    model: Apple MacBook Pro (16-inch, M1 Max, 2021)
compatible: apple,j316c apple,t6001 apple,arm-platform
chip: M1 Max (t6001)
kernel: 7.1.12-2-12.6-sep-ARCH
  • PASS system.failed-units works System services, omarchy layer 
    PASS  units            no failed system or user units
  • PASS system.snapshots works Snapshots, omarchy layer 
    PASS  snapshots        /.snapshots is a btrfs subvolume holding 6 snapshots

boot

  • FAIL boot.kernel-package doesn't work, but should on this Mac Boot chain, omarchy layer 
    FAIL  kernel           running 7.1.12-2-12.6-sep-ARCH does not belong to an installed kernel package; a reboot is pending or the kernel was removed
  • FAIL boot.chain doesn't work, but should on this Mac Boot chain, omarchy layer 
    FAIL  boot-check       /boot/vmlinuz-linux-aurora is not the 7.1.12-2-20261013.18-sep-ARCH kernel linux-aurora installed
  • PASS boot.files works Boot chain, omarchy layer 
    INFO  boot-file        <hex>  /boot/efi/EFI/Linux/omarchy_linux-aurora-12.6.efi
INFO  boot-file        <hex>  /boot/efi/EFI/Linux/omarchy_linux-aurora.efi
INFO  boot-file        <hex>  /boot/efi/EFI/Linux/qualify-7.2.10.efi
INFO  boot-file        <hex>  /boot/efi/limine.conf
INFO  boot-file        <hex>  /boot/efi/m1n1/boot.bin
  • SKIP boot.encryption not tested Disk encryption, omarchy layer 
    the root filesystem isn't encrypted: part btrfs < disk

packages

  • PASS packages.repositories works Package repositories, omarchy layer 
    PASS  repos            omarchy-aurora omarchy asahi-alarm core extra alarm aur
  • PASS packages.kernel-updates works Package repositories, omarchy layer 
    PASS  kernel-repo      linux-aurora updates from [omarchy-aurora]
  • FAIL packages.hardware doesn't work, but should on this Mac First-boot hardware setup, omarchy layer 
    not installed: vulkan-asahi
installed: mesa 1:26.2.4-1, asahi-audio 4.1-1, speakersafetyd 2.0.1-1, alsa-ucm-conf-asahi 10-1

setup

  • SKIP setup.first-boot-hardware not tested First-boot hardware setup, omarchy layer 
    omarchy-provision-hardware.service is disabled on this image by design: omarchy-mac-first-boot runs the deferred hardware setup (20-mac-first-boot.conf)
first boot is done, but its journal no longer shows how it went
  • PASS setup.vendor-firmware works Vendor firmware, omarchy layer 
    PASS  vendor-firmware  omarchy-vendor-firmware.service finished in this boot

hardware

  • GAP hardware.drivers not yet supported by Aurora A driver for every hardware node, aurora layer 
    420 hardware nodes: 367 claimed by a driver, 29 with no device of their own, 5 that no driver binds by design (CPU frequency clusters, timer, SMBIOS), 18 disabled, 1 unclaimed
unclaimed: apple,mesa-fingerprint (1 node): unknown hardware
  • PASS hardware.firmware works Firmware for every driver that asks, omarchy layer 
    no firmware-load failures in this boot's kernel log
  • PASS hardware.probe-errors works A driver for every hardware node, aurora layer 
    no driver probe errors in this boot's kernel log
  • PASS hardware.kernel-config works Kernel build options (compared with Asahi's), aurora layer 
    compared with Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07)
51 options differ: 31 built here but not by Asahi, 16 built by Asahi but not here, 4 set differently
CONFIG_APPLE_SEP: Asahi y, this kernel m
CONFIG_APPLE_SEP_FV_INTERFACE: Asahi n, this kernel y
CONFIG_APPLE_T6030_DISPLAY_GATE: Asahi n, this kernel y
CONFIG_APPLE_TUNABLE: Asahi m, this kernel y
CONFIG_ARM64_BTI_KERNEL: Asahi n, this kernel y
CONFIG_BLK_INLINE_ENCRYPTION: Asahi n, this kernel y
CONFIG_BPF_LSM: Asahi y, this kernel n
CONFIG_BT_MTK7932_PCIE: Asahi n, this kernel m
CONFIG_BUILDTIME_MCOUNT_SORT: Asahi y, this kernel n
CONFIG_DRM_ACCEL_ANE: Asahi n, this kernel m
CONFIG_DRM_APPLE_FABRIC_CORE: Asahi n, this kernel m
CONFIG_DYNAMIC_FTRACE: Asahi y, this kernel n
CONFIG_DYNAMIC_FTRACE_WITH_ARGS: Asahi y, this kernel n
CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS: Asahi y, this kernel n
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS: Asahi y, this kernel n
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY: Asahi y, this kernel n
CONFIG_FTRACE_SYSCALLS: Asahi y, this kernel n
CONFIG_FUNCTION_ALIGNMENT: Asahi 8, this kernel 4
CONFIG_FUNCTION_ALIGNMENT_8B: Asahi y, this kernel n
CONFIG_FUNCTION_GRAPH_TRACER: Asahi y, this kernel n
CONFIG_FUNCTION_TRACER: Asahi y, this kernel n
CONFIG_GENERIC_TRACER: Asahi y, this kernel n
CONFIG_HAS_LTO_CLANG: Asahi n, this kernel y
CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS: Asahi n, this kernel y
CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC: Asahi n, this kernel y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS: Asahi y, this kernel n
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS: Asahi y, this kernel n
CONFIG_HID_APPLE_MTP_HAPTIC: Asahi n, this kernel m
CONFIG_IGB: Asahi n, this kernel m
CONFIG_IGB_HWMON: Asahi n, this kernel y
CONFIG_IGC: Asahi n, this kernel m
CONFIG_IGC_LEDS: Asahi n, this kernel y
CONFIG_MT7932_FULLMAC: Asahi n, this kernel m
CONFIG_MTD_PHRAM: Asahi n, this kernel m
CONFIG_NET_VENDOR_I825XX: Asahi n, this kernel y
CONFIG_NET_VENDOR_INTEL: Asahi n, this kernel y
CONFIG_PCIE_APPLE_PIODMA_DIAG: Asahi n, this kernel y
CONFIG_RESET_APPLE_CIO: Asahi n, this kernel y
CONFIG_SERIAL_APPLE_DOCKCHANNEL: Asahi n, this kernel y
CONFIG_SERIAL_APPLE_DOCKCHANNEL_EARLYCON: Asahi n, this kernel y
[11 more differences]

gpu

  • PASS gpu.driver works GPU, asahi layer 
    asahi driver bound to 406400000.gpu
  • PASS gpu.vulkan works GPU, asahi layer 
    Apple M1 Max (G13C C0): Honeykrisp, Mesa 26.3.0-devel (git-69bde15340), Vulkan 1.4.362
  • PASS gpu.opengl works GPU, asahi layer 
    renderer: Apple M1 Max (G13C C0)
OpenGL core profile version: 4.6 (Core Profile) Mesa 26.2.4-arch1.1
OpenGL ES profile version: OpenGL ES 3.2 Mesa 26.2.4-arch1.1

video

  • SKIP video.h264-on-screen not tested Video decoder, asahi layer 
    skipped: running over SSH: the test card is played on this Mac's own screen, for someone at it
  • SKIP video.hevc-on-screen not tested Video decoder, asahi layer 
    skipped: running over SSH: the test card is played on this Mac's own screen, for someone at it

display

  • PASS display.outputs works Built-in display, asahi layer 
    PASS  displays         1 active: eDP-1 3456x2160@120
  • SKIP display.external-native-mode not tested Display coprocessor (DCP), asahi layer 
    skipped: no external display connected
  • SKIP display.controller not tested Display coprocessor (DCP), asahi layer 
    apple-display-check checks the converged image's omarchy-mac integration; not run on Omarchy, mx-mac
  • SKIP display.backlight not tested Display brightness, asahi layer 
    apple-display-check checks the converged image's omarchy-mac integration; not run on Omarchy, mx-mac
  • SKIP display.notch-strip not tested Bar clear of the notch, omarchy layer 
    apple-display-check checks the converged image's omarchy-mac integration; not run on Omarchy, mx-mac
  • SKIP display.notch-bar not tested Bar clear of the notch, omarchy layer 
    asked: Look at the top bar on the built-in screen: is every icon and label clear of the camera notch?
answer: skip
  • SKIP display.brightness-steps not tested Display brightness, asahi layer 
    backlight apple-panel-bl: 0/500 at the start
skipped: brightnessctl couldn't set the backlight (Failed to set brightness: Operation not permitted)
  • SKIP display.cursor not tested Built-in display, asahi layer 
    asked: Move the pointer all over the built-in screen, over the top bar too: is it visible everywhere, without trails or flicker?
answer: skip

audio

  • PASS audio.sound-cards works Audio interface (MCA), asahi layer 
    PASS  sound-cards      AppleJ316HPAI, AppleJ316
  • PASS audio.default-sink works Speakers, asahi layer 
    PASS  default-sink     MacBook Pro J316 Speakers (audio_effect.j316-convolver)
  • SKIP audio.speaker-dsp not tested Speakers, asahi layer 
    apple-audio-check checks the converged image's omarchy-mac integration; not run on Omarchy, mx-mac
  • PASS audio.speaker-protection works Speaker protection, omarchy layer 
    PASS  speakersafetyd   speakersafetyd is active
  • SKIP audio.speaker-amps-unlocked not tested Speaker protection, omarchy layer 
    apple-audio-check checks the converged image's omarchy-mac integration; not run on Omarchy, mx-mac
  • SKIP audio.microphone-mapping not tested Microphone mapping, omarchy layer 
    apple-audio-check checks the converged image's omarchy-mac integration; not run on Omarchy, mx-mac
  • PASS audio.microphone-signal works Microphones, asahi layer 
    default input: effect_output.j316-mic
captured 65536 samples: peak 574, rms 105.5 (16-bit)
  • SKIP audio.speaker-tone not tested Speakers, asahi layer 
    speakersafetyd: active
kernel log: Speaker volumes unlocked
default output: audio_effect.j316-convolver (the speakers' DSP sink)
played a 2 s 440 Hz tone at 30% volume on audio_effect.j316-convolver
asked: Did you hear a short tone from the built-in speakers, without crackling or a pop?
answer: skip
  • SKIP audio.headphone-detection not tested 3.5 mm headphone jack, asahi layer 
    asked: Plug headphones into the headphone jack now (s if you have none). Did the Mac switch its sound to them?
answer: skip
default output after: audio_effect.j316-convolver (the speakers' DSP sink)

network

  • PASS network.wifi works Wi-Fi, asahi layer 
    PASS  wifi             wlan0 is connected
  • PASS network.wifi-backend works iwd Wi-Fi backend, omarchy layer 
    PASS  wifi-backend     NetworkManager uses iwd
  • PASS network.bluetooth works Bluetooth, asahi layer 
    PASS  bluetooth        controller powered
  • SKIP network.bluetooth-pairing not tested Bluetooth, asahi layer 
    Bluetooth controller powered (mac-check)
asked: Put a Bluetooth device (headphones, a mouse or a keyboard) in pairing mode and pair it: open Bluetooth (Super+Ctrl+B in Omarchy, or bluetui) and pick it (s if you have none to hand). Did it pair and work?
answer: skip
paired devices: 0 before, 0 after
  • SKIP network.wifi-first-join not tested First join to a 5 GHz Wi-Fi network, omarchy layer 
    skipped: running over SSH, where it could cut the connection

sleep

  • SKIP sleep.lid-suspend not tested Suspend and sleep, asahi layer 
    skipped: running over SSH, where it could cut the connection
  • SKIP sleep.clamshell not tested Clamshell mode (lid closed with an external display), omarchy layer 
    skipped: running over SSH, where it could cut the connection
  • SKIP sleep.wifi-after-resume not tested Wi-Fi, asahi layer 
    skipped: running over SSH, where it could cut the connection
  • SKIP sleep.thunderbolt-after-resume not tested Thunderbolt, asahi layer 
    skipped: running over SSH, where it could cut the connection

input

  • SKIP input.ambient-light not tested Always-on processor (AOP: ambient light sensor, lid angle), aurora layer 
    apple-display-check checks the converged image's omarchy-mac integration; not run on Omarchy, mx-mac
  • SKIP input.auto-keyboard-light not tested Automatic keyboard backlight, omarchy layer 
    apple-display-check checks the converged image's omarchy-mac integration; not run on Omarchy, mx-mac
  • SKIP input.keyboard-light-follows-room not tested Automatic keyboard backlight, omarchy layer 
    before: ambient light 0 lux, keyboard light 0/255
asked: Keep it covered: did the keyboard light come on, or get brighter, within about 10 seconds?
answer: skip
while covered: ambient light 0 lux, keyboard light 0/255
  • SKIP input.function-keys not tested Keyboard, asahi layer 
    Hyprland couldn't list the input devices (run from the desktop to see them)
hid_apple fnmode: 2 (F-keys first, media keys with Fn)
asked: On the built-in keyboard, press the brightness keys (F1, F2) and the volume keys (F10, F11, F12), with Fn if they need it: did each do what its key shows?
answer: skip
  • SKIP input.trackpad-gestures not tested Trackpad, asahi layer 
    Hyprland couldn't list the input devices (run from the desktop to see them)
Hyprland config: three-finger workspace swipe off
click: asked: On the built-in trackpad, press down to click: did it click?
click: answer: skip
two-finger click: asked: Click with two fingers: did it right-click (a menu, where there is one)?
two-finger click: answer: skip
two-finger scroll: asked: Scroll with two fingers, up and down: did it scroll smoothly both ways?
two-finger scroll: answer: skip
three-finger swipe: skipped: off in your config

sep

  • PASS sep.attach works Secure enclave (SEP), asahi layer 
    SEP attached and advertised endpoints; fingerprint matching is checked separately
system firmware (sepOS proxy): 26.6.2
system iBoot build: mBoot-18000.161.10
stub firmware (not running sepOS): 13.5
stub iBoot build: iBoot-8422.141.2
m1n1 stage 2: v1.6.1-omarchy.aurora14
actual sepOS version/build: unavailable (not exposed by the kernel)
SEP diagnostics ABI: 1
SEP profile: T6000/J316s
SEP boot: cold
SEP protocol: sepos13
SEP attach: attached
SEP endpoints: 12
SEP keystore: open
SEP keybag: unknown
SEP sensor: unbound
SEP touchid: unknown
SEP xart: disabled
profile and protocol describe the driver, not the running sepOS version
SEP driver bound: yes
/dev/sep-bio present: yes
xART writes parameter: unavailable
keybag provisioning parameter: unavailable
default sensor calibration file: unavailable
sensor device-tree node: present
sensor node enabled: yes
linux-aurora: 7.1.12.aurora2-20261013.18
m1n1-aurora: 1.6.1.aurora14-1
libfprint: 1.94.100-1.1
aurora-touchid: 20261003-2
fprintd: 1.94.5-2
apple-sep.service: active
aurora-sep.service: inactive
fprintd.service: inactive

touch-id

  • SKIP touch-id.ready not tested Touch ID, asahi layer 
    read-only SEP installation: fingerprint operations are disabled
SEP diagnostics ABI: 1
SEP profile: T6000/J316s
SEP boot: cold
SEP protocol: sepos13
SEP attach: attached
SEP endpoints: 12
SEP keystore: open
SEP keybag: unknown
SEP sensor: unbound
SEP touchid: unknown
SEP xart: disabled
profile and protocol describe the driver, not the running sepOS version
SEP driver bound: yes
/dev/sep-bio present: yes
xART writes parameter: unavailable
keybag provisioning parameter: unavailable
default sensor calibration file: unavailable
sensor device-tree node: present
sensor node enabled: yes
linux-aurora: 7.1.12.aurora2-20261013.18
m1n1-aurora: 1.6.1.aurora14-1
libfprint: 1.94.100-1.1
aurora-touchid: 20261003-2
fprintd: 1.94.5-2
apple-sep.service: active
aurora-sep.service: inactive
fprintd.service: inactive
  • SKIP touch-id.unlock not tested Touch ID, asahi layer 
    skipped: requires a person at this Mac's local terminal; unattended and SSH runs collect diagnostics only

camera

  • PASS camera.isp works Camera image signal processor (ISP), aurora layer 
    camera: /dev/video1, from the ISP driver (apple-isp)
other video devices: video0 (avd)
  • PASS camera.frames works Camera image signal processor (ISP), aurora layer 
    asked ffmpeg for 30 frames from /dev/video1 (read and discarded, none kept)
stream: 1920x1080, nv12
frames: 30 of 30
  • SKIP camera.image not tested Camera image signal processor (ISP), aurora layer 
    skipped: running over SSH: the camera is shown on this Mac's own screen, for someone at it

ports

  • PASS ports.usb-c works USB3 on Thunderbolt ports, asahi layer 
    USB-C ports: 4 (USB-PD controller, /sys/class/typec), 4 with something plugged in
port 0: plugged in (data device, power sink)
port 1: plugged in (data device, power sink)
port 2: plugged in (data host, power source)
port 3: plugged in (data host, power source)
USB controllers: 4 root hubs (480 Mbps, 10000 Mbps)
USB devices: none
  • PASS ports.thunderbolt works Thunderbolt, asahi layer 
    Thunderbolt/USB4 controllers: 1 (domains registered by thunderbolt-apple-nhi)
linked: another computer, host-to-host (20.0 Gb/s, 2 lanes)
retimers: 1
  • SKIP ports.external-displays not tested External displays over USB-C (DP alt mode and USB4), aurora layer 
    USB-C display connectors: 3 (DP-1, DP-2, DP-3)
skipped: no display plugged into a USB-C port
  • SKIP ports.devices-work not tested USB3 on Thunderbolt ports, asahi layer 
    listed: 4 USB-C port(s) in use, 0 USB device(s), 1 Thunderbolt/USB4 link(s)
asked: Is everything you plugged into the USB-C ports listed above, and does it work (a stick's files open, a hub's or dock's ports work, a charger charges)?
answer: skip
  • SKIP ports.external-display-picture not tested External displays over USB-C (DP alt mode and USB4), aurora layer 
    skipped: no display in use on a USB-C port

power

  • PASS power.battery works Battery information, asahi layer 
    macsmc-battery: Full, 100% charged, charge limit 100%
  • PASS power.charge-limit works Battery information, asahi layer 
    charge limit before: 100% (charging restarts at 100%)
set 80%: the SMC reads back 80% (charging restarts at 75%)
cleared to 100%: the SMC reads back 100% (charging restarts at 100%)
put back to 100% afterwards
  • FAIL power.charge-limit-kept doesn't work, but should on this Mac Battery charge limit kept across reboots, omarchy layer 
    nothing saved in /etc/udev/macsmc-battery.conf
omarchy-battery-charge-limit isn't installed (omarchy-mac's `omarchy battery charge limit`)
nothing of omarchy-mac's restores a saved limit at boot (/usr/lib/udev/rules.d/94-omarchy-mac-battery-charge-limit.rules, /usr/lib/omarchy-mac/battery-charge-limit-restore missing)
the saved limit put back as it was (no /etc/udev/macsmc-battery.conf)
  • SKIP power.idle-draw not tested Battery information, asahi layer 
    skipped: the Mac is on AC power (battery Full), where the battery doesn't show what it draws, and nobody may be at the Mac to unplug the charger (running over SSH, where it could cut the connection)
  • SKIP power.sleep-drain not tested Suspend and sleep, asahi layer 
    skipped: running over SSH, where it could cut the connection

cpu

  • PASS cpu.frequency-scaling works CPU frequency scaling, asahi layer 
    policy0: CPUs 0-1, apple-cpufreq, 600-2064 MHz, performance
policy2: CPUs 2-5, apple-cpufreq, 600-3036 MHz, performance
policy6: CPUs 6-9, apple-cpufreq, 600-3036 MHz, performance

benchmark

  • PASS benchmark.opengl works GPU, asahi layer score 2,572 points (glmark2 2023.01, suite 1) · compare 
    installed for this run, removed at its end: assimp vkmark
already installed: glmark2 ffmpeg
glmark2-wayland --off-screen at 1920x1080, 8 scenes of 3 s (suite 1)
renderer: Apple M1 Max (G13C C0), OpenGL 4.6 (Compatibility Profile) Mesa 26.2.4-arch1.1
[build] use-vbo=true: 3383 fps (0.296 ms a frame)
[texture] texture-filter=linear: 3822 fps (0.262 ms a frame)
[shading] shading=phong: 3162 fps (0.316 ms a frame)
[bump] bump-render=high-poly: 2865 fps (0.349 ms a frame)
[effect2d] kernel=0,1,0;1,-4,1;0,1,0;: 2833 fps (0.353 ms a frame)
[desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: 1246 fps (0.803 ms a frame)
[jellyfish] <default>: 2559 fps (0.391 ms a frame)
[terrain] <default>: 719 fps (1.392 ms a frame)
glmark2 score: 2572
  • PASS benchmark.vulkan works GPU, asahi layer score 5,831 points (vkmark 2025.01, suite 1) · compare 
    installed for this run, removed at its end: assimp vkmark
already installed: glmark2 ffmpeg
vkmark --winsys headless at 1920x1080, 7 scenes of 3 s (suite 1)
device: Apple M1 Max (G13C C0)
[vertex] device-local=true: 6264 fps (0.160 ms a frame)
[texture] anisotropy=16: 6487 fps (0.154 ms a frame)
[shading] shading=phong: 5359 fps (0.187 ms a frame)
[shading] shading=cel: 5286 fps (0.189 ms a frame)
[effect2d] kernel=blur: 4471 fps (0.224 ms a frame)
[desktop] <default>: 6254 fps (0.160 ms a frame)
[cube] <default>: 6702 fps (0.149 ms a frame)
vkmark score: 5831
  • SKIP benchmark.h264-decode not tested Video decoder, asahi layer 
    installed for this run, removed at its end: assimp vkmark
already installed: glmark2 ffmpeg
clip: H.264 1920x1080, 150 frames (testsrc2, libx264 veryfast), decoded 4 times to a null output (suite 1)
software decode: 600 frames in 0.35 s, 1709.4 fps
skipped: ffmpeg couldn't set up VA-API hardware decode (Failed to initialise VAAPI connection: -1 (unknown libva error).)
  • SKIP benchmark.hevc-decode not tested Video decoder, asahi layer 
    installed for this run, removed at its end: assimp vkmark
already installed: glmark2 ffmpeg
clip: HEVC 1920x1080, 150 frames (testsrc2, libx265 ultrafast), decoded 4 times to a null output (suite 1)
software decode: 600 frames in 0.36 s, 1680.7 fps
skipped: ffmpeg couldn't set up VA-API hardware decode (Failed to initialise VAAPI connection: -1 (unknown libva error).)

hardware inventory

420 hardware nodes: 367 claimed by a driver, 29 with no device of their own, 5 bus or register containers with no driver of their own, 18 disabled, 1 unclaimed.

Unknown hardware

  • apple,mesa-fingerprint (1 node): unknown hardware, no driver claimed it

Kernel build options

51 options differ from Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07).

optionAsahithis kernel
CONFIG_APPLE_SEPym
CONFIG_APPLE_SEP_FV_INTERFACEny
CONFIG_APPLE_T6030_DISPLAY_GATEny
CONFIG_APPLE_TUNABLEmy
CONFIG_ARM64_BTI_KERNELny
CONFIG_BLK_INLINE_ENCRYPTIONny
CONFIG_BPF_LSMyn
CONFIG_BT_MTK7932_PCIEnm
CONFIG_BUILDTIME_MCOUNT_SORTyn
CONFIG_DRM_ACCEL_ANEnm
CONFIG_DRM_APPLE_FABRIC_COREnm
CONFIG_DYNAMIC_FTRACEyn
CONFIG_DYNAMIC_FTRACE_WITH_ARGSyn
CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPSyn
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLSyn
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRYyn
CONFIG_FTRACE_SYSCALLSyn
CONFIG_FUNCTION_ALIGNMENT84
CONFIG_FUNCTION_ALIGNMENT_8Byn
CONFIG_FUNCTION_GRAPH_TRACERyn
CONFIG_FUNCTION_TRACERyn
CONFIG_GENERIC_TRACERyn
CONFIG_HAS_LTO_CLANGny
CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERSny
CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTCny
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPSyn
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLSyn
CONFIG_HID_APPLE_MTP_HAPTICnm
CONFIG_IGBnm
CONFIG_IGB_HWMONny
CONFIG_IGCnm
CONFIG_IGC_LEDSny
CONFIG_MT7932_FULLMACnm
CONFIG_MTD_PHRAMnm
CONFIG_NET_VENDOR_I825XXny
CONFIG_NET_VENDOR_INTELny
CONFIG_PCIE_APPLE_PIODMA_DIAGny
CONFIG_RESET_APPLE_CIOny
CONFIG_SERIAL_APPLE_DOCKCHANNELny
CONFIG_SERIAL_APPLE_DOCKCHANNEL_EARLYCONny
CONFIG_SND_SOC_APPLE_T8140_AOP_AUDIOnm
CONFIG_TASKS_RUDE_RCUyn
CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATORny
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISEyn
CONFIG_TRACE_SYSCALL_BUF_SIZE_DEFAULT63n
CONFIG_TRUSTED_KEYSny
CONFIG_TYPEC_SN201202Xnm
CONFIG_USB4nm
CONFIG_USB4_APPLE_SOCnm
CONFIG_USB4_NETnm
CONFIG_WARN_CONTEXT_ANALYSISny

Asahi hardware states: Asahi Linux feature support, CC BY 3.0. More on this Mac.