omarchy-m-test report MMKSW1h8CkGLL1t4Z6HjqiUL

$ omarchy-m-test

Apple MacBook Pro (13-inch, M1, 2020)

community report

chip: M1 (t8103, board j293)
kernel: 7.1.13-3-2-ARCH
stack: converged 4.0.3
build: 4.0.3rc4-1 · tester 0.1.10
system: archarm, grub, encryption off
tool: omarchy-m-test 0.1.10
catalogue: feature catalogue v11
uploaded: 2026-10-01 15:34 UTC
results: 29 pass · 10 fail · 2 gap · 28 skip

packages (11)

omarchy	4.0.3rc4-1
omarchy-settings	4.0.3rc4-1
omarchy-mac-keyring	20260914-2
linux-asahi	7.1.13.asahi3-2
m1n1	1.6.1-1
uboot-asahi	2026.07.asahi2-1
mesa	1:26.2.3-1
vulkan-asahi	1:26.2.3-1
asahi-audio	4.1-1
speakersafetyd	2.0.1-1
alsa-ucm-conf-asahi	10-1

system

PASS system.identity works Device tree, asahi layer

model: Apple MacBook Pro (13-inch, M1, 2020)
compatible: apple,j293 apple,t8103 apple,arm-platform
chip: M1 (t8103)
kernel: 7.1.13-3-2-ARCH

PASS system.failed-units works System services, omarchy layer
```
PASS  units            no failed system or user units
```

PASS system.snapshots works Snapshots, omarchy layer

PASS  snapshots        /.snapshots is a btrfs subvolume holding 0 snapshots

boot

PASS boot.kernel-package works Boot chain, omarchy layer

PASS  kernel           running 7.1.13-3-2-ARCH from linux-asahi 7.1.13.asahi3-2

FAIL boot.chain doesn't work, but should on this Mac Boot chain, omarchy layer
```
FAIL  boot-check       omarchy-apple-silicon-boot-check is not installed
```

PASS boot.files works Boot chain, omarchy layer

INFO  boot-file        <hex>  /boot/vmlinuz-linux-asahi
INFO  boot-file        <hex>  /boot/grub/grub.cfg
INFO  boot-file        <hex>  /boot/efi/m1n1/boot.bin

SKIP boot.encryption not tested Disk encryption, omarchy layer
```
the root filesystem isn't encrypted: part btrfs < disk
```

packages

PASS packages.repositories works Package repositories, omarchy layer

PASS  repos            omarchy-aarch64 asahi-alarm core extra alarm aur omarchy

PASS packages.kernel-updates works Package repositories, omarchy layer
```
PASS  kernel-repo      linux-asahi updates from [asahi-alarm]
```

PASS packages.hardware works First-boot hardware setup, omarchy layer

installed: mesa 1:26.2.3-1, vulkan-asahi 1:26.2.3-1, asahi-audio 4.1-1, speakersafetyd 2.0.1-1, alsa-ucm-conf-asahi 10-1

setup

SKIP setup.first-boot-hardware not tested First-boot hardware setup, omarchy layer

omarchy-provision-hardware.service never ran: this install has no deferred first-boot hardware setup

FAIL setup.vendor-firmware doesn't work, but should on this Mac Vendor firmware, omarchy layer
```
FAIL  vendor-firmware  omarchy-vendor-firmware.service is not installed
```

hardware

PASS hardware.drivers works A driver for every hardware node, aurora layer

268 hardware nodes: 240 claimed by a driver, 15 with no device of their own, 4 that no driver binds by design (CPU frequency clusters, timer, SMBIOS), 9 disabled, 0 unclaimed

PASS hardware.firmware works Firmware for every driver that asks, omarchy layer
```
no firmware-load failures in this boot's kernel log
```
PASS hardware.probe-errors works A driver for every hardware node, aurora layer
```
no driver probe errors in this boot's kernel log
```

PASS hardware.kernel-config works Kernel build options (compared with Asahi's), aurora layer

compared with Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07)
0 options differ: 0 built here but not by Asahi, 0 built by Asahi but not here, 0 set differently

gpu

PASS gpu.driver works GPU, asahi layer
```
asahi driver bound to 206400000.gpu
```

PASS gpu.vulkan works GPU, asahi layer

Apple M1 (G13G B1): Honeykrisp, Mesa 26.3.0-devel (git-b84ac980c1), Vulkan 1.4.359

PASS gpu.opengl works GPU, asahi layer

renderer: Apple M1 (G13G B1)
OpenGL core profile version: 4.6 (Core Profile) Mesa 26.2.3-arch1.1
OpenGL ES profile version: OpenGL ES 3.2 Mesa 26.2.3-arch1.1
installed for this run, removed at its end: mesa-utils

video

SKIP video.h264-on-screen not tested Video decoder, asahi layer

skipped: running over SSH: the test card is played on this Mac's own screen, for someone at it

SKIP video.hevc-on-screen not tested Video decoder, asahi layer

skipped: running over SSH: the test card is played on this Mac's own screen, for someone at it

display

SKIP display.outputs not tested Built-in display, asahi layer

SKIP  displays         no Hyprland session; log in at the greeter first

PASS display.controller works Display coprocessor (DCP), asahi layer
```
ok - the display controller card exists
```
PASS display.backlight works Display brightness, asahi layer
```
ok - the panel backlight is apple-panel-bl
```
N/A display.notch-strip this Mac doesn't have this hardware Bar clear of the notch, omarchy layer
```
FAIL - appledrm is showing the notch strip
```
SKIP display.notch-bar not tested Bar clear of the notch, omarchy layer
```
skipped: this Mac has no notch
```

SKIP display.brightness-steps not tested Display brightness, asahi layer

backlight apple-panel-bl: 140/509 at the start
skipped: brightnessctl couldn't set the backlight (Failed to set brightness: Operation not permitted)

SKIP display.cursor not tested Built-in display, asahi layer

asked: Move the pointer all over the built-in screen, over the top bar too: is it visible everywhere, without trails or flicker?
answer: skip
note: old lab install (linux-asahi 7.1.13 lab, not an Omarchy M+ image), run over ssh, nobody at the screen

audio

PASS audio.sound-cards works Audio interface (MCA), asahi layer
```
PASS  sound-cards      AppleJ293HPAI, AppleJ293
```
FAIL audio.default-sink doesn't work, but should on this Mac Speakers, asahi layer
```
FAIL  default-sink     PipeWire has no default audio sink
```
FAIL audio.speaker-dsp doesn't work, but should on this Mac Speakers, asahi layer
```
FAIL speaker DSP sink present
```
PASS audio.speaker-protection works Speaker protection, omarchy layer
```
PASS  speakersafetyd   speakersafetyd is active
```
PASS audio.speaker-amps-unlocked works Speaker protection, omarchy layer
```
PASS speaker amps unlocked this boot
```
FAIL audio.microphone-mapping doesn't work, but should on this Mac Microphone mapping, omarchy layer
```
FAIL mic mapper running
```

SKIP audio.microphone-signal not tested Microphones, asahi layer

skipped: the default input isn't the built-in microphone (its name isn't recorded)

SKIP audio.speaker-tone not tested Speakers, asahi layer

speakersafetyd: active
kernel log: Speaker volumes unlocked
default output: another output (its name isn't recorded)
skipped: the default output isn't the speakers' protected DSP sink, so nothing was played

SKIP audio.headphone-detection not tested 3.5 mm headphone jack, asahi layer

asked: Plug headphones into the headphone jack now (s if you have none). Did the Mac switch its sound to them?
answer: skip
default output after: another output (its name isn't recorded)

network

PASS network.wifi works Wi-Fi, asahi layer

PASS  wifi             wlan0 is connected

FAIL network.wifi-backend doesn't work, but should on this Mac iwd Wi-Fi backend, omarchy layer
```
FAIL  wifi-backend     NetworkManager is not configured with wifi.backend=iwd
```
PASS network.bluetooth works Bluetooth, asahi layer
```
PASS  bluetooth        controller powered
```

SKIP network.bluetooth-pairing not tested Bluetooth, asahi layer

Bluetooth controller powered (mac-check)
asked: Put a Bluetooth device (headphones, a mouse or a keyboard) in pairing mode and pair it: open Bluetooth (Super+Ctrl+B in Omarchy, or bluetui) and pick it (s if you have none to hand). Did it pair and work?
answer: skip
paired devices: 1 before, 1 after

SKIP network.wifi-first-join not tested First join to a 5 GHz Wi-Fi network, omarchy layer
```
skipped: running over SSH, where it could cut the connection
```

sleep

SKIP sleep.lid-suspend not tested Suspend and sleep, asahi layer
```
skipped: running over SSH, where it could cut the connection
```
SKIP sleep.clamshell not tested Clamshell mode (lid closed with an external display), omarchy layer
```
skipped: running over SSH, where it could cut the connection
```

SKIP sleep.wifi-after-resume not tested Wi-Fi, asahi layer

skipped: running over SSH, where it could cut the connection

SKIP sleep.thunderbolt-after-resume not tested Thunderbolt, asahi layer
```
skipped: running over SSH, where it could cut the connection
```

input

PASS input.ambient-light works Always-on processor (AOP: ambient light sensor, lid angle), aurora layer
```
ok - ALS and keyboard LED are available
```
FAIL input.auto-keyboard-light doesn't work, but should on this Mac Automatic keyboard backlight, omarchy layer
```
FAIL - the ALS keyboard loop runs
```

SKIP input.keyboard-light-follows-room not tested Automatic keyboard backlight, omarchy layer

before: ambient light 24 lux, keyboard light 0/255
asked: Keep it covered: did the keyboard light come on, or get brighter, within about 10 seconds?
answer: skip
while covered: ambient light 24 lux, keyboard light 0/255

SKIP input.function-keys not tested Keyboard, asahi layer

Hyprland couldn't list the input devices (run from the desktop to see them)
hid_apple fnmode: 1 (media keys first, F-keys with Fn)
asked: On the built-in keyboard, press the brightness keys (F1, F2) and the volume keys (F10, F11, F12), with Fn if they need it: did each do what its key shows?
answer: skip

SKIP input.trackpad-gestures not tested Trackpad, asahi layer

Hyprland couldn't list the input devices (run from the desktop to see them)
Hyprland config: three-finger workspace swipe off
click: asked: On the built-in trackpad, press down to click: did it click?
click: answer: skip
two-finger click: asked: Click with two fingers: did it right-click (a menu, where there is one)?
two-finger click: answer: skip
two-finger scroll: asked: Scroll with two fingers, up and down: did it scroll smoothly both ways?
two-finger scroll: answer: skip
three-finger swipe: skipped: off in your config

camera

PASS camera.isp works Camera image signal processor (ISP), aurora layer

camera: /dev/video1, from the ISP driver (apple-isp)
other video devices: video0 (avd)

FAIL camera.frames doesn't work, but should on this Mac Camera image signal processor (ISP), aurora layer

asked ffmpeg for 30 frames from /dev/video1 (read and discarded, none kept)
frames: 0 of 30
ffmpeg: Error opening input files: Permission denied

SKIP camera.image not tested Camera image signal processor (ISP), aurora layer
```
skipped: the camera gave no frames (see camera.frames)
```

ports

PASS ports.usb-c works USB3 on Thunderbolt ports, asahi layer

USB-C ports: 2 (USB-PD controller, /sys/class/typec), 2 with something plugged in
port 0: plugged in (data host, power source)
port 1: plugged in (data device, power sink)
USB controllers: 2 root hubs (480 Mbps, 10000 Mbps)
USB devices: 1: communications at 480 Mbps

GAP ports.thunderbolt not yet supported by Asahi Thunderbolt, asahi layer

no Thunderbolt/USB4 controller: no Thunderbolt bus in this kernel (thunderbolt-apple-acio, thunderbolt-apple-nhi)

FAIL ports.external-displays doesn't work, but should on this Mac External displays over USB-C (DP alt mode and USB4), aurora layer
```
no display connectors on the USB-C ports (no DP alt mode in this kernel)
```

SKIP ports.devices-work not tested USB3 on Thunderbolt ports, asahi layer

listed: 2 USB-C port(s) in use, 1 USB device(s), 0 Thunderbolt/USB4 link(s)
asked: Is everything you plugged into the USB-C ports listed above, and does it work (a stick's files open, a hub's or dock's ports work, a charger charges)?
answer: skip

SKIP ports.external-display-picture not tested External displays over USB-C (DP alt mode and USB4), aurora layer
```
skipped: no display in use on a USB-C port
```

power

PASS power.battery works Battery information, asahi layer
```
macsmc-battery: Full, 100% charged, charge limit 100%
```

PASS power.charge-limit works Battery information, asahi layer

charge limit before: 100% (charging restarts at 100%)
set 80%: the SMC reads back 80% (charging restarts at 75%)
cleared to 100%: the SMC reads back 100% (charging restarts at 100%)
put back to 100% afterwards

FAIL power.charge-limit-kept doesn't work, but should on this Mac Battery charge limit kept across reboots, omarchy layer

nothing saved in /etc/udev/macsmc-battery.conf
omarchy-battery-charge-limit isn't installed (omarchy-mac's `omarchy battery charge limit`)
nothing of omarchy-mac's restores a saved limit at boot (/usr/lib/udev/rules.d/94-omarchy-mac-battery-charge-limit.rules, /usr/lib/omarchy-mac/battery-charge-limit-restore missing)
the saved limit put back as it was (no /etc/udev/macsmc-battery.conf)

SKIP power.idle-draw not tested Battery information, asahi layer

skipped: the Mac is on AC power (battery Full), where the battery doesn't show what it draws, and nobody may be at the Mac to unplug the charger (running over SSH, where it could cut the connection)

SKIP power.sleep-drain not tested Suspend and sleep, asahi layer
```
skipped: running over SSH, where it could cut the connection
```

cpu

PASS cpu.frequency-scaling works CPU frequency scaling, asahi layer

policy0: CPUs 0-3, apple-cpufreq, 600-2064 MHz, schedutil
policy4: CPUs 4-7, apple-cpufreq, 600-2988 MHz, schedutil

benchmark

SKIP benchmark.opengl not tested GPU, asahi layer

installed for this run, removed at its end: assimp vkmark
already installed: ffmpeg
skipped: no Wayland session to render in (glmark2 renders off-screen, but through the desktop's compositor)

PASS benchmark.vulkan works GPU, asahi layer score 2,639 points (vkmark 2025.01, suite 1) · compare

installed for this run, removed at its end: assimp vkmark
already installed: ffmpeg
vkmark --winsys headless at 1920x1080, 7 scenes of 3 s (suite 1)
device: Apple M1 (G13G B1)
[vertex] device-local=true: 2828 fps (0.354 ms a frame)
[texture] anisotropy=16: 3119 fps (0.321 ms a frame)
[shading] shading=phong: 2356 fps (0.424 ms a frame)
[shading] shading=cel: 2303 fps (0.434 ms a frame)
[effect2d] kernel=blur: 1780 fps (0.562 ms a frame)
[desktop] <default>: 2956 fps (0.338 ms a frame)
[cube] <default>: 3132 fps (0.319 ms a frame)
vkmark score: 2639

SKIP benchmark.h264-decode not tested Video decoder, asahi layer

installed for this run, removed at its end: assimp vkmark
already installed: ffmpeg
clip: H.264 1920x1080, 150 frames (testsrc2, libx264 veryfast), decoded 4 times to a null output (suite 1)
software decode: 600 frames in 0.52 s, 1158.3 fps
skipped: ffmpeg couldn't set up VA-API hardware decode (Failed to initialise VAAPI connection: 1 (operation failed).)

SKIP benchmark.hevc-decode not tested Video decoder, asahi layer

installed for this run, removed at its end: assimp vkmark
already installed: ffmpeg
clip: HEVC 1920x1080, 150 frames (testsrc2, libx265 ultrafast), decoded 4 times to a null output (suite 1)
software decode: 600 frames in 0.59 s, 1016.9 fps
skipped: ffmpeg couldn't set up VA-API hardware decode (Failed to initialise VAAPI connection: 1 (operation failed).)

hardware inventory

268 hardware nodes: 240 claimed by a driver, 15 with no device of their own, 4 bus or register containers with no driver of their own, 9 disabled, 0 unclaimed.

Unknown hardware

None: every node on this Mac is either claimed by a driver or known to the feature catalogue.

Kernel build options

0 options differ from Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07).