$ omarchy-m-test
Apple MacBook Pro (14-inch, M2 Max, 2023)
community report
- chip
- M2 Max (t6021, board j414c)
- kernel
- 7.1.12-2-11-ARCH
- stack
- converged 4.0.0
- build
- 1937418.362376005140001 · set apple-test-1937418f520b-20260926 · linux-aurora 7.1.12.aurora2-11 · omarchy-mac-boot 20260926-1 · tester 0.1.8
- system
- archarm, limine, encryption on
- tool
- omarchy-m-test 0.1.8
- catalogue
- feature catalogue v11
- uploaded
- 2026-09-27 23:43 UTC
- results
- 62 pass · 1 fail · 6 skip
packages (13)
| omarchy | 4.0.0.alpha.quattro.r1790420202.g1937418f520b-1.362376005140001 |
| omarchy-settings | 4.0.0.alpha.quattro.r1790420202.g1937418f520b-1.362376005140001 |
| omarchy-mac | 0.1.0-5.362376005140001 |
| omarchy-mac-boot | 20260926-1.362376005140001 |
| linux-aurora | 7.1.12.aurora2-11 |
| m1n1-aurora | 1.6.1.aurora1-3 |
| uboot-asahi | 2026.07.asahi2-4 |
| limine | 12.9.1-1 |
| mesa | 1:26.2.3-1 |
| vulkan-asahi | 1:26.2.3-1 |
| asahi-audio | 4.1-1 |
| speakersafetyd | 2.0.1-1 |
| alsa-ucm-conf-asahi | 10-1 |
system
-
PASS
system.identity
works
Device tree, asahi layer
model: Apple MacBook Pro (14-inch, M2 Max, 2023) compatible: apple,j414c apple,t6021 apple,arm-platform chip: M2 Max (t6021) kernel: 7.1.12-2-11-ARCH
-
PASS
system.failed-units
works
System services, omarchy layer
PASS units no failed system or user units
-
SKIP
system.snapshots
not tested
Snapshots, omarchy layer
SKIP snapshots needs passwordless sudo
boot
-
PASS
boot.kernel-package
works
Boot chain, omarchy layer
PASS kernel running 7.1.12-2-11-ARCH from linux-aurora 7.1.12.aurora2-11
-
SKIP
boot.chain
not tested
Boot chain, omarchy layer
SKIP boot-check needs passwordless sudo
-
SKIP
boot.files
not tested
Boot chain, omarchy layer
SKIP boot-file hashing the boot files needs passwordless sudo
-
PASS
boot.encryption
works
Disk encryption, omarchy layer
the root filesystem is on an unlocked encrypted volume: crypt btrfs < part crypto_LUKS < disk
packages
-
PASS
packages.repositories
works
Package repositories, omarchy layer
PASS repos omarchy asahi-alarm core extra alarm aur
-
PASS
packages.kernel-updates
works
Package repositories, omarchy layer
PASS kernel-repo linux-aurora updates from [omarchy]
-
PASS
packages.hardware
works
First-boot hardware setup, omarchy layer
installed: mesa 1:26.2.3-1, vulkan-asahi 1:26.2.3-1, asahi-audio 4.1-1, speakersafetyd 2.0.1-1, alsa-ucm-conf-asahi 10-1
setup
-
PASS
setup.first-boot-hardware
works
First-boot hardware setup, omarchy layer
omarchy-provision-hardware.service is disabled on this image by design: omarchy-mac-first-boot runs the deferred hardware setup (20-mac-first-boot.conf) 2026-09-26T22:02:29-04:00 <hostname> omarchy-mac-first-boot[5965]: Creating this Mac's package keyring... 2026-09-26T22:02:43-04:00 <hostname> omarchy-mac-first-boot[5965]: Ready for account setup. 2026-09-26T22:02:43-04:00 <hostname> systemd[1]: Finished Omarchy first boot: finish this Mac's image, then owner setup. nothing left queued (/var/lib/omarchy/image/deferred-steps is gone)
-
PASS
setup.vendor-firmware
works
Vendor firmware, omarchy layer
PASS vendor-firmware omarchy-vendor-firmware.service finished in this boot
hardware
-
PASS
hardware.drivers
works
A driver for every hardware node, aurora layer
435 hardware nodes: 372 claimed by a driver, 35 with no device of their own, 5 that no driver binds by design (CPU frequency clusters, timer, SMBIOS), 23 disabled, 0 unclaimed
-
PASS
hardware.firmware
works
Firmware for every driver that asks, omarchy layer
no firmware-load failures in this boot's kernel log
-
PASS
hardware.probe-errors
works
A driver for every hardware node, aurora layer
no driver probe errors in this boot's kernel log
-
PASS
hardware.kernel-config
works
Kernel build options (compared with Asahi's), aurora layer
compared with Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07) 23 options differ: 5 built here but not by Asahi, 15 built by Asahi but not here, 3 set differently CONFIG_APPLE_TUNABLE: Asahi m, this kernel y CONFIG_BPF_LSM: Asahi y, this kernel n CONFIG_BUILDTIME_MCOUNT_SORT: Asahi y, this kernel n CONFIG_DYNAMIC_FTRACE: Asahi y, this kernel n CONFIG_DYNAMIC_FTRACE_WITH_ARGS: Asahi y, this kernel n CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS: Asahi y, this kernel n CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS: Asahi y, this kernel n CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY: Asahi y, this kernel n CONFIG_FTRACE_SYSCALLS: Asahi y, this kernel n CONFIG_FUNCTION_ALIGNMENT: Asahi 8, this kernel 4 CONFIG_FUNCTION_ALIGNMENT_8B: Asahi y, this kernel n CONFIG_FUNCTION_GRAPH_TRACER: Asahi y, this kernel n CONFIG_FUNCTION_TRACER: Asahi y, this kernel n CONFIG_GENERIC_TRACER: Asahi y, this kernel n CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS: Asahi y, this kernel n CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS: Asahi y, this kernel n CONFIG_RESET_APPLE_CIO: Asahi n, this kernel y CONFIG_TASKS_RUDE_RCU: Asahi y, this kernel n CONFIG_TRACE_SYSCALL_BUF_SIZE_DEFAULT: Asahi 63, this kernel n CONFIG_TYPEC_SN201202X: Asahi n, this kernel m CONFIG_USB4: Asahi n, this kernel m CONFIG_USB4_APPLE_SOC: Asahi n, this kernel m CONFIG_USB4_NET: Asahi n, this kernel m
gpu
-
PASS
gpu.driver
works
GPU, asahi layer
asahi driver bound to 406400000.gpu
-
PASS
gpu.vulkan
works
GPU, asahi layer
Asahi Vulkan driver installed (asahi_icd.json) vulkaninfo (vulkan-tools) isn't installed, so the Vulkan version wasn't read
-
PASS
gpu.opengl
works
GPU, asahi layer
renderer: Apple M2 Max (G14C B1) OpenGL core profile version: 4.6 (Core Profile) Mesa 26.2.3-arch1.1 OpenGL ES profile version: OpenGL ES 3.2 Mesa 26.2.3-arch1.1 installed for this run, removed at its end: mesa-utils
video
-
PASS
video.h264-on-screen
works
Video decoder, asahi layer
already installed: mpv grim ffmpeg hardware decode as mpv is configured: hwdec=vaapi-copy (/etc/mpv/mpv.conf) screen: eDP-1 (built-in), H.264 test card full screen, paused mode (from mpv's log): hardware decode vaapi-copy (copy-back to memory), video output gpu, GPU context wayland screenshot: 756x491, each bar's median colour in its middle, 64 levels allowed per channel red bar: expected #ff0000, saw #ff0000 green bar: expected #00ff00, saw #00ff01 yellow bar: expected #ffff00, saw #feff00 blue bar: expected #0000ff, saw #0100ff magenta bar: expected #ff00ff, saw #ff00fe cyan bar: expected #00ffff, saw #00feff on screen: every bar in its colour
-
PASS
video.hevc-on-screen
works
Video decoder, asahi layer
already installed: mpv grim ffmpeg hardware decode as mpv is configured: hwdec=vaapi-copy (/etc/mpv/mpv.conf) screen: eDP-1 (built-in), HEVC test card full screen, paused mode (from mpv's log): hardware decode vaapi-copy (copy-back to memory), video output gpu, GPU context wayland screenshot: 756x491, each bar's median colour in its middle, 64 levels allowed per channel red bar: expected #ff0000, saw #ff0000 green bar: expected #00ff00, saw #00ff01 yellow bar: expected #ffff00, saw #feff00 blue bar: expected #0000ff, saw #0100ff magenta bar: expected #ff00ff, saw #ff00fe cyan bar: expected #00ffff, saw #00feff on screen: every bar in its colour
display
-
PASS
display.outputs
works
Built-in display, asahi layer
PASS displays 1 active: eDP-1 3024x1964@120
-
PASS
display.controller
works
Display coprocessor (DCP), asahi layer
ok - the display controller card exists
-
PASS
display.backlight
works
Display brightness, asahi layer
ok - the panel backlight is apple-panel-bl
-
PASS
display.notch-strip
works
Bar clear of the notch, omarchy layer
ok - appledrm is showing the notch strip
-
PASS
display.notch-bar
works (unconfirmed)
Bar clear of the notch, omarchy layer
asked: Look at the top bar on the built-in screen: is every icon and label clear of the camera notch? answer: yes, by pressing Enter (the default; unconfirmed)
-
PASS
display.brightness-steps
works (unconfirmed)
Display brightness, asahi layer
backlight apple-panel-bl: 290/500 at the start stepped to 203 (read back 203), 130 (read back 130), 72 (read back 72) put back to 290 asked: Did the built-in screen dim (or brighten) in three steps, then go back to how it was? answer: yes, by pressing Enter (the default; unconfirmed)
-
PASS
display.cursor
works (unconfirmed)
Built-in display, asahi layer
asked: Move the pointer all over the built-in screen, over the top bar too: is it visible everywhere, without trails or flicker? answer: yes, by pressing Enter (the default; unconfirmed)
audio
-
PASS
audio.sound-cards
works
Audio interface (MCA), asahi layer
PASS sound-cards AppleJ414, AppleJ414HPAI
-
PASS
audio.default-sink
works
Speakers, asahi layer
PASS default-sink MacBook Pro J414 Speakers (audio_effect.j414-convolver)
-
PASS
audio.speaker-dsp
works
Speakers, asahi layer
PASS speaker DSP sink present
-
PASS
audio.speaker-protection
works
Speaker protection, omarchy layer
PASS speakersafetyd speakersafetyd is active
-
PASS
audio.speaker-amps-unlocked
works
Speaker protection, omarchy layer
PASS speaker amps unlocked this boot
-
PASS
audio.microphone-mapping
works
Microphone mapping, omarchy layer
PASS mic mapper running
-
PASS
audio.microphone-signal
works
Microphones, asahi layer
default input: omarchy_asahi_mic.monitor captured 65536 samples: peak 125, rms 17.3 (16-bit)
-
PASS
audio.speaker-tone
works (unconfirmed)
Speakers, asahi layer
speakersafetyd: active kernel log: Speaker volumes unlocked default output: audio_effect.j414-convolver (the speakers' DSP sink) played a 2 s 440 Hz tone at 30% volume on audio_effect.j414-convolver asked: Did you hear a short tone from the built-in speakers, without crackling or a pop? answer: yes, by pressing Enter (the default; unconfirmed)
-
PASS
audio.headphone-detection
works (unconfirmed)
3.5 mm headphone jack, asahi layer
asked: Plug headphones into the headphone jack now (s if you have none). Did the Mac switch its sound to them? answer: yes, by pressing Enter (the default; unconfirmed) default output after: alsa_output.platform-sound.HiFi__Headphones__sink (the headphone jack)
network
-
PASS
network.wifi
works
Wi-Fi, asahi layer
PASS wifi wlan0 is connected
-
PASS
network.wifi-backend
works
iwd Wi-Fi backend, omarchy layer
PASS wifi-backend NetworkManager uses iwd
-
PASS
network.bluetooth
works
Bluetooth, asahi layer
PASS bluetooth controller powered
-
PASS
network.bluetooth-pairing
works (unconfirmed)
Bluetooth, asahi layer
Bluetooth controller powered (mac-check) asked: Put a Bluetooth device (headphones, a mouse or a keyboard) in pairing mode and pair it: open Bluetooth (Super+Ctrl+B in Omarchy, or bluetui) and pick it (s if you have none to hand). Did it pair and work? answer: yes, by pressing Enter (the default; unconfirmed) paired devices: 0 before, 1 after
-
PASS
network.wifi-first-join
works
First join to a 5 GHz Wi-Fi network, omarchy layer
before: associated on 5 GHz (5745 MHz) with an address, on a NetworkManager connection that connects automatically reloaded the Wi-Fi driver (brcmfmac); watched the rejoin for 45 s first join: associated 2.45 s after the driver loaded first join: an address (traffic) arrived 2.87 s after the driver loaded, 0.42 s after associating band: 5 GHz (5745 MHz) joins: 1
sleep
-
PASS
sleep.lid-suspend
works
Suspend and sleep, asahi layer
before: eDP-1 on lid closed: the Mac went to sleep 0.59 s later (s2idle) woke up after 72.3 s asleep, when the lid opened
-
SKIP
sleep.clamshell
not tested
Clamshell mode (lid closed with an external display), omarchy layer
skipped: you chose not to close the lid
-
PASS
sleep.wifi-after-resume
works
Wi-Fi, asahi layer
before sleeping: wlan0 connected with an IPv4 address after waking up: an IPv4 address again 2.6 s after the Mac woke up
-
SKIP
sleep.thunderbolt-after-resume
not tested
Thunderbolt, asahi layer
skipped: nothing was connected over Thunderbolt or USB4 before the Mac went to sleep
input
-
PASS
input.ambient-light
works
Always-on processor (AOP: ambient light sensor, lid angle), aurora layer
ok - ALS and keyboard LED are available
-
PASS
input.auto-keyboard-light
works
Automatic keyboard backlight, omarchy layer
ok - the ALS keyboard loop runs
-
PASS
input.keyboard-light-follows-room
works (unconfirmed)
Automatic keyboard backlight, omarchy layer
before: ambient light 72 lux, keyboard light 160/255 asked: Keep it covered: did the keyboard light come on, or get brighter, within about 10 seconds? answer: yes, by pressing Enter (the default; unconfirmed) while covered: ambient light 168 lux, keyboard light 12/255 note: answer not backed by readings (the keyboard light didn't come on or get brighter: ambient light 72 to 168 lux, keyboard light 160/255 to 12/255)
-
PASS
input.function-keys
works
Keyboard, asahi layer
built-in keyboard (Hyprland): apple-mtp-keyboard hid_apple fnmode: 3 (auto: media keys first, F-keys with Fn) asked: On the built-in keyboard, press the brightness keys (F1, F2) and the volume keys (F10, F11, F12), with Fn if they need it: did each do what its key shows? answer: yes
-
FAIL
input.trackpad-gestures
doesn't work, but should on this Mac
Trackpad, asahi layer
built-in trackpad (Hyprland): apple-mtp-multi-touch Hyprland config: tap-to-click unknown, three-finger workspace swipe on click: asked: On the built-in trackpad, press down to click: did it click? click: answer: yes, by pressing Enter (the default; unconfirmed) tap-to-click: asked: Tap the trackpad lightly, without pressing it down: did the tap click? tap-to-click: answer: no two-finger click: asked: Click with two fingers: did it right-click (a menu, where there is one)? two-finger click: answer: yes, by pressing Enter (the default; unconfirmed) two-finger scroll: asked: Scroll with two fingers, up and down: did it scroll smoothly both ways? two-finger scroll: answer: yes, by pressing Enter (the default; unconfirmed) three-finger swipe: asked: Swipe three fingers left and right: did it switch workspaces? three-finger swipe: answer: yes, by pressing Enter (the default; unconfirmed)
camera
-
PASS
camera.isp
works
Camera image signal processor (ISP), aurora layer
camera: /dev/video1, from the ISP driver (apple-isp) other video devices: video0 (avd)
-
PASS
camera.frames
works
Camera image signal processor (ISP), aurora layer
asked ffmpeg for 30 frames from /dev/video1 (read and discarded, none kept) stream: 1920x1080, nv12 frames: 30 of 30
-
PASS
camera.image
works (unconfirmed)
Camera image signal processor (ISP), aurora layer
showed /dev/video1 live for 10 s (mpv) asked: Did the camera window show you, live: the right way up, in focus, with natural colours and smooth movement? answer: yes, by pressing Enter (the default; unconfirmed)
ports
-
PASS
ports.usb-c
works
USB3 on Thunderbolt ports, asahi layer
USB-C ports: 4 (USB-PD controller, /sys/class/typec), 1 with something plugged in port 1: plugged in (data host, power sink) USB controllers: 2 root hubs (480 Mbps, 10000 Mbps) USB devices: 1: hub at 480 Mbps
-
SKIP
ports.thunderbolt
not tested
Thunderbolt, asahi layer
no Thunderbolt/USB4 domain registered (thunderbolt-apple-nhi) skipped: the device you plugged in isn't Thunderbolt/USB4 (no USB-C partner in Thunderbolt alt mode or USB4 mode), so the Thunderbolt/USB4 host never starts
-
PASS
ports.external-displays
works
External displays over USB-C (DP alt mode and USB4), aurora layer
USB-C display connectors: 3 (USB-1, USB-2, USB-3) USB-1: in use, 3840x2160 preferred
-
PASS
ports.devices-work
works (unconfirmed)
USB3 on Thunderbolt ports, asahi layer
listed: 1 USB-C port(s) in use, 1 USB device(s), 0 Thunderbolt/USB4 link(s) asked: Is everything you plugged into the USB-C ports listed above, and does it work (a stick's files open, a hub's or dock's ports work, a charger charges)? answer: yes, by pressing Enter (the default; unconfirmed)
-
PASS
ports.external-display-picture
works (unconfirmed)
External displays over USB-C (DP alt mode and USB4), aurora layer
display on USB-C: USB-1 at 3840x2160 asked: Look at the display on USB-C: is the picture sharp and steady at its full resolution, and does the pointer move onto it? answer: yes, by pressing Enter (the default; unconfirmed)
power
-
PASS
power.battery
works
Battery information, asahi layer
macsmc-battery: Charging, 74% charged, charge limit 100%
-
PASS
power.charge-limit
works
Battery information, asahi layer
charge limit before: 100% (charging restarts at 100%) set 80%: the SMC reads back 80% (charging restarts at 75%) cleared to 100%: the SMC reads back 100% (charging restarts at 100%) put back to 100% afterwards
-
PASS
power.charge-limit-kept
works
Battery charge limit kept across reboots, omarchy layer
`omarchy-battery-charge-limit` shows 100%, as the SMC has omarchy-mac's udev rule and helper that restore a saved limit at boot are installed nothing saved in /etc/udev/macsmc-battery.conf `omarchy battery charge limit 80`: the SMC reads back 80% (charging restarts at 75%), 80% saved for the next boot `omarchy battery charge limit 100`: the SMC reads back 100% (charging restarts at 100%) the saved limit put back as it was (no /etc/udev/macsmc-battery.conf)
-
PASS
power.idle-draw
works
Battery information, asahi layer
idle on battery for 30 s: 10.7 W average (lowest 10.0 W, highest 13.2 W), from power_now
-
PASS
power.sleep-drain
works
Suspend and sleep, asahi layer
asleep for 192.3 min (s2idle), on battery battery: 39.03 Wh to 31.24 Wh drain: 4.6% per hour asleep, 2.43 W on average (a full battery would last about 22 h asleep)
cpu
-
PASS
cpu.frequency-scaling
works
CPU frequency scaling, asahi layer
policy0: CPUs 0-3, apple-cpufreq, 912-2424 MHz, schedutil policy4: CPUs 4-7, apple-cpufreq, 702-3264 MHz, schedutil policy8: CPUs 8-11, apple-cpufreq, 702-3264 MHz, schedutil
benchmark
-
PASS
benchmark.opengl
works
GPU, asahi layer
score 2,383 points (glmark2 2023.01, suite 1) · compare
installed for this run, removed at its end: glmark2 assimp vkmark already installed: ffmpeg glmark2-wayland --off-screen at 1920x1080, 8 scenes of 3 s (suite 1) renderer: Apple M2 Max (G14C B1), OpenGL 4.6 (Compatibility Profile) Mesa 26.2.3-arch1.1 [build] use-vbo=true: 3332 fps (0.300 ms a frame) [texture] texture-filter=linear: 3314 fps (0.302 ms a frame) [shading] shading=phong: 2983 fps (0.335 ms a frame) [bump] bump-render=high-poly: 2714 fps (0.368 ms a frame) [effect2d] kernel=0,1,0;1,-4,1;0,1,0;: 2574 fps (0.389 ms a frame) [desktop] blur-radius=5:effect=blur:passes=1:separable=true:windows=4: 962 fps (1.040 ms a frame) [jellyfish] <default>: 2502 fps (0.400 ms a frame) [terrain] <default>: 695 fps (1.440 ms a frame) glmark2 score: 2383
-
PASS
benchmark.vulkan
works
GPU, asahi layer
score 5,410 points (vkmark 2025.01, suite 1) · compare
installed for this run, removed at its end: glmark2 assimp vkmark already installed: ffmpeg vkmark --winsys headless at 1920x1080, 7 scenes of 3 s (suite 1) device: Apple M2 Max (G14C B1) [vertex] device-local=true: 5684 fps (0.176 ms a frame) [texture] anisotropy=16: 6344 fps (0.158 ms a frame) [shading] shading=phong: 5139 fps (0.195 ms a frame) [shading] shading=cel: 5159 fps (0.194 ms a frame) [effect2d] kernel=blur: 3661 fps (0.273 ms a frame) [desktop] <default>: 5774 fps (0.173 ms a frame) [cube] <default>: 6112 fps (0.164 ms a frame) vkmark score: 5410
-
PASS
benchmark.h264-decode
works
Video decoder, asahi layer
score 449 frames/s (ffmpeg n9.0.2, suite 1) · compare
installed for this run, removed at its end: glmark2 assimp vkmark already installed: ffmpeg clip: H.264 1920x1080, 150 frames (testsrc2, libx264 veryfast), decoded 4 times to a null output (suite 1) software decode: 600 frames in 0.32 s, 1875.0 fps hardware decode (VA-API): 600 frames in 1.34 s, 449.1 fps hardware decode is 0.24x software decode ffmpeg n9.0.2
-
PASS
benchmark.hevc-decode
works
Video decoder, asahi layer
score 766 frames/s (ffmpeg n9.0.2, suite 1) · compare
installed for this run, removed at its end: glmark2 assimp vkmark already installed: ffmpeg clip: HEVC 1920x1080, 150 frames (testsrc2, libx265 ultrafast), decoded 4 times to a null output (suite 1) software decode: 600 frames in 0.38 s, 1591.5 fps hardware decode (VA-API): 600 frames in 0.78 s, 766.3 fps hardware decode is 0.48x software decode ffmpeg n9.0.2
hardware inventory
435 hardware nodes: 372 claimed by a driver, 35 with no device of their own, 5 bus or register containers with no driver of their own, 23 disabled, 0 unclaimed.
Unknown hardware
None: every node on this Mac is either claimed by a driver or known to the feature catalogue.
Kernel build options
23 options differ from Asahi's linux-asahi 7.1.13.asahi3-2 (asahi-alarm/PKGBUILDs@d585b07).
| option | Asahi | this kernel |
|---|---|---|
CONFIG_APPLE_TUNABLE | m | y |
CONFIG_BPF_LSM | y | n |
CONFIG_BUILDTIME_MCOUNT_SORT | y | n |
CONFIG_DYNAMIC_FTRACE | y | n |
CONFIG_DYNAMIC_FTRACE_WITH_ARGS | y | n |
CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS | y | n |
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS | y | n |
CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY | y | n |
CONFIG_FTRACE_SYSCALLS | y | n |
CONFIG_FUNCTION_ALIGNMENT | 8 | 4 |
CONFIG_FUNCTION_ALIGNMENT_8B | y | n |
CONFIG_FUNCTION_GRAPH_TRACER | y | n |
CONFIG_FUNCTION_TRACER | y | n |
CONFIG_GENERIC_TRACER | y | n |
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS | y | n |
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS | y | n |
CONFIG_RESET_APPLE_CIO | n | y |
CONFIG_TASKS_RUDE_RCU | y | n |
CONFIG_TRACE_SYSCALL_BUF_SIZE_DEFAULT | 63 | n |
CONFIG_TYPEC_SN201202X | n | m |
CONFIG_USB4 | n | m |
CONFIG_USB4_APPLE_SOC | n | m |
CONFIG_USB4_NET | n | m |